Re: [PATCH v4 1/2] usb: dwc2: alloc dma aligned buffer for isoc split in

From: Doug Anderson
Date: Thu May 10 2018 - 17:02:08 EST


Hi,

On Wed, May 9, 2018 at 3:11 AM, William Wu <william.wu@xxxxxxxxxxxxxx> wrote:
> The commit 3bc04e28a030 ("usb: dwc2: host: Get aligned DMA in
> a more supported way") rips out a lot of code to simply the
> allocation of aligned DMA. However, it also introduces a new
> issue when use isoc split in transfer.
>
> In my test case, I connect the dwc2 controller with an usb hs
> Hub (GL852G-12), and plug an usb fs audio device (Plantronics
> headset) into the downstream port of Hub. Then use the usb mic
> to record, we can find noise when playback.
>
> It's because that the usb Hub uses an MDATA for the first
> transaction and a DATA0 for the second transaction for the isoc
> split in transaction. An typical isoc split in transaction sequence
> like this:
>
> - SSPLIT IN transaction
> - CSPLIT IN transaction
> - MDATA packet
> - CSPLIT IN transaction
> - DATA0 packet
>
> The DMA address of MDATA (urb->dma) is always DWORD-aligned, but
> the DMA address of DATA0 (urb->dma + qtd->isoc_split_offset) may
> not be DWORD-aligned, it depends on the qtd->isoc_split_offset (the
> length of MDATA). In my test case, the length of MDATA is usually
> unaligned, this cause DATA0 packet transmission error.
>
> This patch use kmem_cache to allocate aligned DMA buf for isoc
> split in transaction. Note that according to usb 2.0 spec, the
> maximum data payload size is 1023 bytes for each fs isoc ep,
> and the maximum allowable interrupt data payload size is 64 bytes
> or less for fs interrupt ep. So we set the size of object to be
> 1024 bytes in the kmem cache.
>
> Signed-off-by: William Wu <william.wu@xxxxxxxxxxxxxx>
> ---
> Changes in v4:
> - get rid of "qh->dw_align_buf_size"
> - allocate unaligned_cache for Address DMA mode and Desc DMA mode
> - freeing order opposite of allocation

You only did half of this. You changed the order under "error4" but
forgot to make dwc2_hcd_remove() match.


> - do dma_map_single() with the size of DWC2_KMEM_UNALIGNED_BUF_SIZE
>
> Changes in v3:
> - Modify the commit message
> - Use Kmem_cache to allocate aligned DMA buf
> - Fix coding style
>
> Changes in v2:
> - None
>
> drivers/usb/dwc2/core.h | 3 ++
> drivers/usb/dwc2/hcd.c | 87 ++++++++++++++++++++++++++++++++++++++++++--
> drivers/usb/dwc2/hcd.h | 8 ++++
> drivers/usb/dwc2/hcd_intr.c | 8 ++++
> drivers/usb/dwc2/hcd_queue.c | 3 ++
> 5 files changed, 105 insertions(+), 4 deletions(-)

My only remaining comment is a really nitty detail. Unless someone
else feels strongly about it, I'm not sure it's worth spinning the
patch just for that nit unless someone else has review comments.

I believe I've looked at this enough to say:

Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>