Re: [PATCH] net: phy: DP83TC811: Introduce support for the DP83TC811 phy

From: Andrew Lunn
Date: Wed May 09 2018 - 09:43:26 EST


> +static int dp83811_config_aneg(struct phy_device *phydev)
> +{
> + int err;
> + int value;
> +
> + value = phy_read(phydev, MII_DP83811_SGMII_CTRL);
> + if (phydev->autoneg == AUTONEG_ENABLE) {
> + err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
> + (DP83811_SGMII_AUTO_NEG_EN | value));
> + if (err < 0)
> + return err;
> + } else {
> + err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
> + (~DP83811_SGMII_AUTO_NEG_EN & value));
> + if (err < 0)
> + return err;
> + }
> +

Hi Dan

You say SGMII is unreliable on one of these devices. Should you check
phydev->interface before enabling SGMII autoneg?

> + return genphy_config_aneg(phydev);
> +}
> +
> +static int dp83811_config_init(struct phy_device *phydev)
> +{
> + int err;
> + int value;
> +
> + err = genphy_config_init(phydev);
> + if (err < 0)
> + return err;
> +
> + if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
> + value = phy_read(phydev, MII_DP83811_SGMII_CTRL);
> + if (!(value & DP83811_SGMII_EN)) {
> + err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
> + (DP83811_SGMII_EN | value));
> + if (err < 0)
> + return err;
> + } else {
> + err = phy_write(phydev, MII_DP83811_SGMII_CTRL,
> + (~DP83811_SGMII_EN & value));
> + if (err < 0)
> + return err;
> + }

This looks to be a duplicate of dp83811_config_aneg()?

> + }
> +
> + value = DP83811_WOL_MAGIC_EN | DP83811_WOL_SECURE_ON | DP83811_WOL_EN;
> +
> + return phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
> + value);
> +}
> +
> +static int dp83811_phy_reset(struct phy_device *phydev)
> +{
> + int err;
> +
> + err = phy_write(phydev, MII_DP83811_RESET_CTRL, DP83811_HW_RESET);
> + if (err < 0)
> + return err;
> +
> + dp83811_config_init(phydev);

I don't think you need to initialize it here. phylib should call that
soon after the reset.

> +
> + return 0;
> +}
> +

> +static struct phy_driver dp83811_driver[] = {
> + {
> + .phy_id = DP83TC811_PHY_ID,
> + .phy_id_mask = 0xfffffff0,
> + .name = "TI DP83TC811",
> + .features = PHY_BASIC_FEATURES,
> + .flags = PHY_HAS_INTERRUPT,
> + .config_init = genphy_config_init,

????

Andrew