Re: [PATCH v3 11/15] ARM: dts: dra7-evm: Add wilink8 wlan support

[Rob Herring]

On Wed, Apr 25, 2018 at 7:54 AM, Kishon Vijay Abraham I <kishon@xxxxxx> wrote:
> From: Hari Nagalla <hnagalla@xxxxxx>
>
> The wilink module is a combo wireless connectivity sdio
> card based on Texas Instrument's wl18xx solution. It is a
> 4-wire, 1.8V, embedded sdio wlan device with an external
> irq line and is power-controlled by a gpio-based fixed
> regulator.
>
> Add pinmux configuration and IODelay values for MMC4.
> On dra7-evm, MMC4 is used for connecting to wilink module.
>
> IODelay data credits to :  Vishal Mahaveer <vishalm@xxxxxx>
> and Sekhar Nori <nsekhar@xxxxxx>
>
> Signed-off-by: Ido Yariv <ido@xxxxxxxxxx>
> Signed-off-by: Eyal Reizer <eyalr@xxxxxx>
> Signed-off-by: Hari Nagalla <hnagalla@xxxxxx>
> Signed-off-by: Sekhar Nori <nsekhar@xxxxxx>
> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
> ---
>  arch/arm/boot/dts/dra7-evm-common.dtsi | 15 +++++++++++++++
>  arch/arm/boot/dts/dra7-evm.dts         | 25 +++++++++++++++++++++++++
>  2 files changed, 40 insertions(+)
>
> diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi
> index 05a7b1a01bc3..3590c40fc112 100644
> --- a/arch/arm/boot/dts/dra7-evm-common.dtsi
> +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi
> @@ -260,3 +260,18 @@
>  &pcie1_rc {
>         status = "okay";
>  };
> +
> +&mmc4 {
> +       bus-width = <4>;
> +       cap-power-off-card;
> +       keep-power-in-suspend;
> +       non-removable;
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +       wlcore: wlcore@2 {

wifi@2