[PATCH AUTOSEL for 4.9 094/293] net/hns:bugfix of ethtool -t phy self_test

From: Sasha Levin
Date: Sun Apr 08 2018 - 22:26:44 EST


From: Lin Yun Sheng <linyunsheng@xxxxxxxxxx>

[ Upstream commit 7fe5b914313ff67d71cb2b5aa4b850e0884e75dd ]

This patch fixes the phy loopback self_test failed issue. when
Marvell Phy Module is loaded, it will powerdown fiber when doing
phy loopback self test, which cause phy loopback self_test fail.

Signed-off-by: Lin Yun Sheng <linyunsheng@xxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
---
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
index 86a496d71995..ea5f7bd14b80 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
@@ -288,9 +288,15 @@ static int hns_nic_config_phy_loopback(struct phy_device *phy_dev, u8 en)

/* Force 1000M Link, Default is 0x0200 */
phy_write(phy_dev, 7, 0x20C);
- phy_write(phy_dev, HNS_PHY_PAGE_REG, 0);

- /* Enable PHY loop-back */
+ /* Powerup Fiber */
+ phy_write(phy_dev, HNS_PHY_PAGE_REG, 1);
+ val = phy_read(phy_dev, COPPER_CONTROL_REG);
+ val &= ~PHY_POWER_DOWN;
+ phy_write(phy_dev, COPPER_CONTROL_REG, val);
+
+ /* Enable Phy Loopback */
+ phy_write(phy_dev, HNS_PHY_PAGE_REG, 0);
val = phy_read(phy_dev, COPPER_CONTROL_REG);
val |= PHY_LOOP_BACK;
val &= ~PHY_POWER_DOWN;
@@ -299,6 +305,12 @@ static int hns_nic_config_phy_loopback(struct phy_device *phy_dev, u8 en)
phy_write(phy_dev, HNS_PHY_PAGE_REG, 0xFA);
phy_write(phy_dev, 1, 0x400);
phy_write(phy_dev, 7, 0x200);
+
+ phy_write(phy_dev, HNS_PHY_PAGE_REG, 1);
+ val = phy_read(phy_dev, COPPER_CONTROL_REG);
+ val |= PHY_POWER_DOWN;
+ phy_write(phy_dev, COPPER_CONTROL_REG, val);
+
phy_write(phy_dev, HNS_PHY_PAGE_REG, 0);
phy_write(phy_dev, 9, 0xF00);

--
2.15.1