[PATCH AUTOSEL for 4.4 006/162] Fix loop device flush before configure v3

From: Sasha Levin
Date: Sun Apr 08 2018 - 21:39:30 EST


From: James Wang <jnwang@xxxxxxxx>

[ Upstream commit 6460495709aeb651896bc8e5c134b2e4ca7d34a8 ]

While installing SLES-12 (based on v4.4), I found that the installer
will stall for 60+ seconds during LVM disk scan. The root cause was
determined to be the removal of a bound device check in loop_flush()
by commit b5dd2f6047ca ("block: loop: improve performance via blk-mq").

Restoring this check, examining ->lo_state as set by loop_set_fd()
eliminates the bad behavior.

Test method:
modprobe loop max_loop=64
dd if=/dev/zero of=disk bs=512 count=200K
for((i=0;i<4;i++))do losetup -f disk; done
mkfs.ext4 -F /dev/loop0
for((i=0;i<4;i++))do mkdir t$i; mount /dev/loop$i t$i;done
for f in `ls /dev/loop[0-9]*|sort`; do \
echo $f; dd if=$f of=/dev/null bs=512 count=1; \
done

Test output: stock patched
/dev/loop0 18.1217e-05 8.3842e-05
/dev/loop1 6.1114e-05 0.000147979
/dev/loop10 0.414701 0.000116564
/dev/loop11 0.7474 6.7942e-05
/dev/loop12 0.747986 8.9082e-05
/dev/loop13 0.746532 7.4799e-05
/dev/loop14 0.480041 9.3926e-05
/dev/loop15 1.26453 7.2522e-05

Note that from loop10 onward, the device is not mounted, yet the
stock kernel consumes several orders of magnitude more wall time
than it does for a mounted device.
(Thanks for Mike Galbraith <efault@xxxxxx>, give a changelog review.)

Reviewed-by: Hannes Reinecke <hare@xxxxxxxx>
Reviewed-by: Ming Lei <ming.lei@xxxxxxxxxx>
Signed-off-by: James Wang <jnwang@xxxxxxxx>
Fixes: b5dd2f6047ca ("block: loop: improve performance via blk-mq")
Signed-off-by: Jens Axboe <axboe@xxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
---
drivers/block/loop.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 3e65ae144fde..1dd16f26e77d 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -623,6 +623,9 @@ static int loop_switch(struct loop_device *lo, struct file *file)
*/
static int loop_flush(struct loop_device *lo)
{
+ /* loop not yet configured, no running thread, nothing to flush */
+ if (lo->lo_state != Lo_bound)
+ return 0;
return loop_switch(lo, NULL);
}

--
2.15.1