Re: [PATCH v2 1/2] dt-bindings: iio: afe: add current-sense-cuicuit and voltage-divider

From: Jonathan Cameron
Date: Sun Apr 08 2018 - 12:50:47 EST


On Tue, 3 Apr 2018 17:36:34 +0200
Peter Rosin <peda@xxxxxxxxxx> wrote:

circuit in the patch title is spelled wrong.

> An ADC is often used to measure other quantities indirectly. These
> bindings describe two cases, a current through a sense resistor, and
> a "big" voltage measured with the help of a voltage divider.
>
> Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>

Will definitely be wanting wide opinions on this one - Rob in particularly
for the binding side.

One comment inline. What we have here is nice and generic, but is
it what would be 'expected' for current sense circuit? Should we
also be more specific in the naming. There are lots of options for
current sense circuits and this is just the simplest (current loop
for example).

One option would be to use current-sense-shunt perhaps?

https://en.wikipedia.org/wiki/Current_sensing_techniques
Gives a few that I didn't think of beyond current loops etc.


> ---
> .../bindings/iio/afe/current-sense-circuit.txt | 45 ++++++++++++++++++++++
> .../bindings/iio/afe/voltage-divider.txt | 45 ++++++++++++++++++++++
> MAINTAINERS | 7 ++++
> 3 files changed, 97 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/afe/current-sense-circuit.txt
> create mode 100644 Documentation/devicetree/bindings/iio/afe/voltage-divider.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/afe/current-sense-circuit.txt b/Documentation/devicetree/bindings/iio/afe/current-sense-circuit.txt
> new file mode 100644
> index 000000000000..0bc7d89387c0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/afe/current-sense-circuit.txt
> @@ -0,0 +1,45 @@
> +Current Sense Curcuit
> +=====================
> +
> +When an io-channel measures the voltage over a current sense resistor,
> +the interesting mesaurement is often the current through the resistor,
> +not the voltage over it. This binding describes such a current sense
> +curcuit.
> +
> +Required properties:
> +- compatible : "current-sense-circuit"
> +- io-channels : Channel node of a voltage io-channel.
> +
> +Optional properties:
> +- numerator : The io-channel scale is multiplied by this value (default 1).
> +- denominator : The io-channel scale is divided by this value (default 1).
> +
> +Example:
> +The system current is measured by measuring the voltage over a
> +3.3 ohms sense resistor.

Hmm. It sort of feels like the binding doesn't really reflect the
hardware as directly as it might. Should we be explicitly having the
resistance in this case? (with some more mapping logic needed in the
driver to figure out the scaling this causes).

> +
> +sysi {
> + compatible = "current-sense-circuit";
> + io-channels = <&tiadc 0>;
> +
> + /* Divide the ADC voltage by 33/10 (i.e. 3.3) to get the current. */
> + numerator = <10>;
> + denominator = <33>;
> +};
> +
> +&i2c {
> + tiadc: adc@48 {
> + compatible = "ti,ads1015";
> + reg = <0x48>;
> + #io-channel-cells = <1>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 { /* IN0,IN1 differential */
> + reg = <0>;
> + ti,gain = <1>;
> + ti,datarate = <4>;
> + };
> + };
> +};
> diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.txt b/Documentation/devicetree/bindings/iio/afe/voltage-divider.txt
> new file mode 100644
> index 000000000000..fd4a215d9e6d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.txt
> @@ -0,0 +1,45 @@
> +Voltage divider
> +===============
> +
> +When an io-channel measures the midpoint of a voltage divider, the
> +interesting voltage is often the voltage over the full resistance
> +of the divider. This binding describes the voltage divider in such
> +a curcuit.
> +
> +Required properties:
> +- compatible : "voltage-divider"
> +- io-channels : Channel node of a voltage io-channel.
> +
> +Optional properties:
> +- numerator : The io-channel scale is multiplied by this value (default 1).
> +- denominator : The io-channel scale is divided by this value (default 1).
> +
> +Example:
> +The system voltage is circa 12V, but divided down with a 22/200
> +voltage divider to adjust it to the ADC range.
> +
> +SYSV ADC GND
> + + + +
> + | .-----. | .----. |
> + '--| 200 |-+-| 22 |--'
> + '-----' '----'
> +
> +sysv {
> + compatible = "voltage-divider";
> + io-channels = <&maxadc 1>;
> +
> + /* Multiply the ADC voltage by 222/22 to get the system voltage. */
> + numerator = <222>; /* 200 + 22 */
> + denominator = <22>;
> +};
> +
> +&spi {
> + maxadc: adc@0 {
> + compatible = "maxim,max1027";
> + reg = <0>;
> + #io-channel-cells = <1>;
> + interrupt-parent = <&gpio5>;
> + interrupts = <15 IRQ_TYPE_EDGE_RISING>;
> + spi-max-frequency = <1000000>;
> + };
> +};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 36a28e979e9a..9dbe5019c6bd 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6889,6 +6889,13 @@ F: drivers/staging/iio/
> F: include/linux/iio/
> F: tools/iio/
>
> +IIO UNIT CONVERTER
> +M: Peter Rosin <peda@xxxxxxxxxx>
> +L: linux-iio@xxxxxxxxxxxxxxx
> +S: Maintained
> +F: Documentation/devicetree/bindings/iio/afe/current-sense-circuit.txt
> +F: Documentation/devicetree/bindings/iio/afe/voltage-divider.txt
> +
> IKANOS/ADI EAGLE ADSL USB DRIVER
> M: Matthieu Castet <castet.matthieu@xxxxxxx>
> M: Stanislaw Gruszka <stf_xl@xxxxx>