[PATCH v6 06/30] drm/bridge: analogix_dp: Set PD_INC_BG first when powering up edp phy

From: Enric Balletbo i Serra
Date: Thu Apr 05 2018 - 06:02:05 EST


From: zain wang <wzz@xxxxxxxxxxxxxx>

Following the correct power up sequence:
dp_pd=ff => dp_pd=7f => wait 10us => dp_pd=00

Cc: StÃphane Marchesin <marcheu@xxxxxxxxxxxx>
Signed-off-by: zain wang <wzz@xxxxxxxxxxxxxx>
Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
Signed-off-by: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
Tested-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Reviewed-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
---

drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 10 ++++++++--
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h | 3 +++
2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index b47c5af43560..bb72f8b0e603 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -321,10 +321,16 @@ void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
break;
case POWER_ALL:
if (enable) {
- reg = DP_PHY_PD | AUX_PD | CH3_PD | CH2_PD |
- CH1_PD | CH0_PD;
+ reg = DP_ALL_PD;
writel(reg, dp->reg_base + phy_pd_addr);
} else {
+ reg = DP_ALL_PD;
+ writel(reg, dp->reg_base + phy_pd_addr);
+ usleep_range(10, 15);
+ reg &= ~DP_INC_BG;
+ writel(reg, dp->reg_base + phy_pd_addr);
+ usleep_range(10, 15);
+
writel(0x00, dp->reg_base + phy_pd_addr);
}
break;
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
index 40200c652533..9602668669f4 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
@@ -342,12 +342,15 @@
#define DP_PLL_REF_BIT_1_2500V (0x7 << 0)

/* ANALOGIX_DP_PHY_PD */
+#define DP_INC_BG (0x1 << 7)
+#define DP_EXP_BG (0x1 << 6)
#define DP_PHY_PD (0x1 << 5)
#define AUX_PD (0x1 << 4)
#define CH3_PD (0x1 << 3)
#define CH2_PD (0x1 << 2)
#define CH1_PD (0x1 << 1)
#define CH0_PD (0x1 << 0)
+#define DP_ALL_PD (0xff)

/* ANALOGIX_DP_PHY_TEST */
#define MACRO_RST (0x1 << 5)
--
2.16.3