[PATCH 0/3] STM32 Extended TrustZone Protection driver

From: Benjamin Gaignard
Date: Tue Feb 27 2018 - 09:10:25 EST


On early boot stages STM32MP1 platform is able to dedicate some hardware blocks
to a secure OS running in TrustZone.
We need to avoid using those hardware blocks on non-secure context (i.e. kernel)
because read/write access will all be discarded.

Extended TrustZone Protection driver register itself as listener of
BUS_NOTIFY_BIND_DRIVER and check, given the device address, if the hardware block
could be used in a Linux context. If not it returns NOTIFY_BAD to driver core
to stop driver probing.

NOTE: patches 2 and 3 should be applied only on
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git stm32-next
but until this patch: https://lkml.org/lkml/2018/2/26/386
find it way to mailine KBuild will complain about them.

Benjamin Gaignard (3):
driver core: check notifier_call_chain return value
dt-bindings: stm32: Add bindings for Extended TrustZone Protection
ARM: mach-stm32: Add Extended TrustZone Protection driver

.../bindings/arm/stm32/st,stm32mp1-etzpc.txt | 13 ++
arch/arm/mach-stm32/Kconfig | 7 +
arch/arm/mach-stm32/Makefile | 1 +
arch/arm/mach-stm32/stm32-etzpc.c | 252 +++++++++++++++++++++
drivers/base/dd.c | 9 +-
5 files changed, 279 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/stm32/st,stm32mp1-etzpc.txt
create mode 100644 arch/arm/mach-stm32/stm32-etzpc.c

--
2.15.0