Re: [PATCH v2 4/4] ARM: PWM: add allwinner sun8i pwm support.

[Maxime Ripard]

Hi,

Thanks for respinning this serie. It looks mostly good, but you still
have a quite significant number of checkpatch (--strict) warnings that
you should address.

On Sun, Feb 25, 2018 at 09:53:08PM +0800, hao_zhang wrote:
> +#define CAPTURE_IRQ_ENABLE_REG	0x0010
> +#define CFIE(ch)	BIT(ch << 1 + 1)
> +#define CRIE(ch)	BIT(ch << 1)

You should also put your argument between parentheses here (and in all
your other macros).

> +static const u16 div_m_table[] = {
> +	1,
> +	2,
> +	4,
> +	8,
> +	16,
> +	32,
> +	64,
> +	128,
> +	256
> +};

If this is just a power of two, you can use either the power of two /
ilog2 to switch back and forth, instead of using that table.

> +static int sun8i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> +		struct pwm_state *state)
> +{
> +	int ret;
> +	struct sun8i_pwm_chip *sun8i_pwm = to_sun8i_pwm_chip(chip);
> +	struct pwm_state cstate;
> +
> +	pwm_get_state(pwm, &cstate);
> +	if (!cstate.enabled) {
> +		ret = clk_prepare_enable(sun8i_pwm->clk);
> +		if (ret) {
> +			dev_err(chip->dev, "Failed to enable PWM clock\n");
> +			return ret;
> +		}
> +	}
> +
> +	spin_lock(&sun8i_pwm->ctrl_lock);

What do you need that spinlock for? Can you use a mutex instead?

Thanks!
Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature