Re: [PATCH v11 2/7] PCI/AER: factor out error reporting from AER

From: poza
Date: Mon Feb 26 2018 - 00:39:32 EST


On 2018-02-26 11:02, poza@xxxxxxxxxxxxxx wrote:
On 2018-02-24 05:12, Bjorn Helgaas wrote:
On Fri, Feb 23, 2018 at 01:53:59PM +0530, Oza Pawandeep wrote:
This patch factors out error reporting callbacks, which are currently
tightly coupled with AER.

Add blank line between paragraphs.

DPC should be able to register callbacks and attmept recovery when DPC
trigger event occurs.

s/attmept/attempt/

This patch basically moves code from aerdrv_core.c to pcie-err.c. Make it
do *only* that.


sure.

Signed-off-by: Oza Pawandeep <poza@xxxxxxxxxxxxxx>

diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index fcd8191..abc514e 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -342,6 +342,9 @@ static inline resource_size_t pci_resource_alignment(struct pci_dev *dev,

void pci_enable_acs(struct pci_dev *dev);

+/* PCI error reporting and recovery */
+void pcie_do_recovery(struct pci_dev *dev, int severity);

Add this declaration in the first patch, the one where you rename the
function.


done.

#ifdef CONFIG_PCIEASPM
void pcie_aspm_init_link_state(struct pci_dev *pdev);
void pcie_aspm_exit_link_state(struct pci_dev *pdev);
diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile
index 223e4c3..d669497 100644
--- a/drivers/pci/pcie/Makefile
+++ b/drivers/pci/pcie/Makefile
@@ -6,7 +6,7 @@
# Build PCI Express ASPM if needed
obj-$(CONFIG_PCIEASPM) += aspm.o

-pcieportdrv-y := portdrv_core.o portdrv_pci.o portdrv_bus.o
+pcieportdrv-y := portdrv_core.o portdrv_pci.o portdrv_bus.o pcie-err.o

Can we name this just "drivers/pci/pcie/err.c"? I know we have
pcie-dpc.c already, but it does get a little repetitious to type
"pci" THREE times in that path.


sure, will rename.

pcieportdrv-$(CONFIG_ACPI) += portdrv_acpi.o

obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o
diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h
index 5449e5c..bc9db53 100644
--- a/drivers/pci/pcie/aer/aerdrv.h
+++ b/drivers/pci/pcie/aer/aerdrv.h
@@ -76,36 +76,6 @@ struct aer_rpc {
*/
};

-struct aer_broadcast_data {
- enum pci_channel_state state;
- enum pci_ers_result result;
-};
-
-static inline pci_ers_result_t merge_result(enum pci_ers_result orig,
- enum pci_ers_result new)
-{
- if (new == PCI_ERS_RESULT_NO_AER_DRIVER)
- return PCI_ERS_RESULT_NO_AER_DRIVER;
-
- if (new == PCI_ERS_RESULT_NONE)
- return orig;
-
- switch (orig) {
- case PCI_ERS_RESULT_CAN_RECOVER:
- case PCI_ERS_RESULT_RECOVERED:
- orig = new;
- break;
- case PCI_ERS_RESULT_DISCONNECT:
- if (new == PCI_ERS_RESULT_NEED_RESET)
- orig = PCI_ERS_RESULT_NEED_RESET;
- break;
- default:
- break;
- }
-
- return orig;
-}
-
extern struct bus_type pcie_port_bus_type;
void aer_isr(struct work_struct *work);
void aer_print_error(struct pci_dev *dev, struct aer_err_info *info);
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c
index aeb83a0..f60b1bb 100644
--- a/drivers/pci/pcie/aer/aerdrv_core.c
+++ b/drivers/pci/pcie/aer/aerdrv_core.c
@@ -23,6 +23,7 @@
#include <linux/slab.h>
#include <linux/kfifo.h>
#include "aerdrv.h"
+#include "../../pci.h"

#define PCI_EXP_AER_FLAGS (PCI_EXP_DEVCTL_CERE | PCI_EXP_DEVCTL_NFERE | \
PCI_EXP_DEVCTL_FERE | PCI_EXP_DEVCTL_URRE)
@@ -230,191 +231,6 @@ static bool find_source_device(struct pci_dev *parent,
return true;
}

-static int report_error_detected(struct pci_dev *dev, void *data)
-{
- pci_ers_result_t vote;
- const struct pci_error_handlers *err_handler;
- struct aer_broadcast_data *result_data;
- result_data = (struct aer_broadcast_data *) data;
-
- device_lock(&dev->dev);
- dev->error_state = result_data->state;
-
- if (!dev->driver ||
- !dev->driver->err_handler ||
- !dev->driver->err_handler->error_detected) {
- if (result_data->state == pci_channel_io_frozen &&
- dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
- /*
- * In case of fatal recovery, if one of down-
- * stream device has no driver. We might be
- * unable to recover because a later insmod
- * of a driver for this device is unaware of
- * its hw state.
- */
- pci_printk(KERN_DEBUG, dev, "device has %s\n",
- dev->driver ?
- "no AER-aware driver" : "no driver");
- }
-
- /*
- * If there's any device in the subtree that does not
- * have an error_detected callback, returning
- * PCI_ERS_RESULT_NO_AER_DRIVER prevents calling of
- * the subsequent mmio_enabled/slot_reset/resume
- * callbacks of "any" device in the subtree. All the
- * devices in the subtree are left in the error state
- * without recovery.
- */
-
- if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
- vote = PCI_ERS_RESULT_NO_AER_DRIVER;
- else
- vote = PCI_ERS_RESULT_NONE;
- } else {
- err_handler = dev->driver->err_handler;
- vote = err_handler->error_detected(dev, result_data->state);
- pci_uevent_ers(dev, PCI_ERS_RESULT_NONE);
- }
-
- result_data->result = merge_result(result_data->result, vote);
- device_unlock(&dev->dev);
- return 0;
-}
-
-static int report_mmio_enabled(struct pci_dev *dev, void *data)
-{
- pci_ers_result_t vote;
- const struct pci_error_handlers *err_handler;
- struct aer_broadcast_data *result_data;
- result_data = (struct aer_broadcast_data *) data;
-
- device_lock(&dev->dev);
- if (!dev->driver ||
- !dev->driver->err_handler ||
- !dev->driver->err_handler->mmio_enabled)
- goto out;
-
- err_handler = dev->driver->err_handler;
- vote = err_handler->mmio_enabled(dev);
- result_data->result = merge_result(result_data->result, vote);
-out:
- device_unlock(&dev->dev);
- return 0;
-}
-
-static int report_slot_reset(struct pci_dev *dev, void *data)
-{
- pci_ers_result_t vote;
- const struct pci_error_handlers *err_handler;
- struct aer_broadcast_data *result_data;
- result_data = (struct aer_broadcast_data *) data;
-
- device_lock(&dev->dev);
- if (!dev->driver ||
- !dev->driver->err_handler ||
- !dev->driver->err_handler->slot_reset)
- goto out;
-
- err_handler = dev->driver->err_handler;
- vote = err_handler->slot_reset(dev);
- result_data->result = merge_result(result_data->result, vote);
-out:
- device_unlock(&dev->dev);
- return 0;
-}
-
-static int report_resume(struct pci_dev *dev, void *data)
-{
- const struct pci_error_handlers *err_handler;
-
- device_lock(&dev->dev);
- dev->error_state = pci_channel_io_normal;
-
- if (!dev->driver ||
- !dev->driver->err_handler ||
- !dev->driver->err_handler->resume)
- goto out;
-
- err_handler = dev->driver->err_handler;
- err_handler->resume(dev);
- pci_uevent_ers(dev, PCI_ERS_RESULT_RECOVERED);
-out:
- device_unlock(&dev->dev);
- return 0;
-}
-
-/**
- * broadcast_error_message - handle message broadcast to downstream drivers
- * @dev: pointer to from where in a hierarchy message is broadcasted down
- * @state: error state
- * @error_mesg: message to print
- * @cb: callback to be broadcasted
- *
- * Invoked during error recovery process. Once being invoked, the content
- * of error severity will be broadcasted to all downstream drivers in a
- * hierarchy in question.
- */
-static pci_ers_result_t broadcast_error_message(struct pci_dev *dev,
- enum pci_channel_state state,
- char *error_mesg,
- int (*cb)(struct pci_dev *, void *))
-{
- struct aer_broadcast_data result_data;
-
- pci_printk(KERN_DEBUG, dev, "broadcast %s message\n", error_mesg);
- result_data.state = state;
- if (cb == report_error_detected)
- result_data.result = PCI_ERS_RESULT_CAN_RECOVER;
- else
- result_data.result = PCI_ERS_RESULT_RECOVERED;
-
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- /*
- * If the error is reported by a bridge, we think this error
- * is related to the downstream link of the bridge, so we
- * do error recovery on all subordinates of the bridge instead
- * of the bridge and clear the error status of the bridge.
- */
- if (cb == report_error_detected)
- dev->error_state = state;
- pci_walk_bus(dev->subordinate, cb, &result_data);
- if (cb == report_resume) {
- pci_cleanup_aer_uncorrect_error_status(dev);
- dev->error_state = pci_channel_io_normal;
- }
- } else {
- /*
- * If the error is reported by an end point, we think this
- * error is related to the upstream link of the end point.
- */
- if (state == pci_channel_io_normal)
- /*
- * the error is non fatal so the bus is ok, just invoke
- * the callback for the function that logged the error.
- */
- cb(dev, &result_data);
- else
- pci_walk_bus(dev->bus, cb, &result_data);
- }
-
- return result_data.result;
-}
-
-/**
- * default_reset_link - default reset function
- * @dev: pointer to pci_dev data structure
- *
- * Invoked when performing link reset on a Downstream Port or a
- * Root Port with no aer driver.
- */
-static pci_ers_result_t default_reset_link(struct pci_dev *dev)
-{
- pci_reset_bridge_secondary_bus(dev);
- pci_printk(KERN_DEBUG, dev, "downstream link has been reset\n");
- return PCI_ERS_RESULT_RECOVERED;
-}
-
static int find_aer_service_iter(struct device *device, void *data)
{
struct pcie_port_service_driver *service_driver, **drv;
@@ -432,7 +248,7 @@ static int find_aer_service_iter(struct device *device, void *data)
return 0;
}

-static struct pcie_port_service_driver *find_aer_service(struct pci_dev *dev)
+struct pcie_port_service_driver *pci_find_aer_service(struct pci_dev *dev)

Move this rename to a different patch. The new name should probably
start with "pcie" like you did with pcie_do_recovery().


sure, will do that.

{
struct pcie_port_service_driver *drv = NULL;

@@ -440,107 +256,7 @@ static struct pcie_port_service_driver *find_aer_service(struct pci_dev *dev)

return drv;
}
-
-static pci_ers_result_t reset_link(struct pci_dev *dev)
-{
- struct pci_dev *udev;
- pci_ers_result_t status;
- struct pcie_port_service_driver *driver;
-
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- /* Reset this port for all subordinates */
- udev = dev;
- } else {
- /* Reset the upstream component (likely downstream port) */
- udev = dev->bus->self;
- }
-
- /* Use the aer driver of the component firstly */
- driver = find_aer_service(udev);
-
- if (driver && driver->reset_link) {
- status = driver->reset_link(udev);
- } else if (udev->has_secondary_link) {
- status = default_reset_link(udev);
- } else {
- pci_printk(KERN_DEBUG, dev, "no link-reset support at upstream device %s\n",
- pci_name(udev));
- return PCI_ERS_RESULT_DISCONNECT;
- }
-
- if (status != PCI_ERS_RESULT_RECOVERED) {
- pci_printk(KERN_DEBUG, dev, "link reset at upstream device %s failed\n",
- pci_name(udev));
- return PCI_ERS_RESULT_DISCONNECT;
- }
-
- return status;
-}
-
-/**
- * pcie_do_recovery - handle nonfatal/fatal error recovery process
- * @dev: pointer to a pci_dev data structure of agent detecting an error
- * @severity: error severity type
- *
- * Invoked when an error is nonfatal/fatal. Once being invoked, broadcast
- * error detected message to all downstream drivers within a hierarchy in
- * question and return the returned code.
- */
-static void pcie_do_recovery(struct pci_dev *dev, int severity)
-{
- pci_ers_result_t status, result = PCI_ERS_RESULT_RECOVERED;
- enum pci_channel_state state;
-
- if (severity == AER_FATAL)
- state = pci_channel_io_frozen;
- else
- state = pci_channel_io_normal;
-
- status = broadcast_error_message(dev,
- state,
- "error_detected",
- report_error_detected);
-
- if (severity == AER_FATAL) {
- result = reset_link(dev);
- if (result != PCI_ERS_RESULT_RECOVERED)
- goto failed;
- }
-
- if (status == PCI_ERS_RESULT_CAN_RECOVER)
- status = broadcast_error_message(dev,
- state,
- "mmio_enabled",
- report_mmio_enabled);
-
- if (status == PCI_ERS_RESULT_NEED_RESET) {
- /*
- * TODO: Should call platform-specific
- * functions to reset slot before calling
- * drivers' slot_reset callbacks?
- */
- status = broadcast_error_message(dev,
- state,
- "slot_reset",
- report_slot_reset);
- }
-
- if (status != PCI_ERS_RESULT_RECOVERED)
- goto failed;
-
- broadcast_error_message(dev,
- state,
- "resume",
- report_resume);
-
- pci_info(dev, "AER: Device recovery successful\n");
- return;
-
-failed:
- pci_uevent_ers(dev, PCI_ERS_RESULT_DISCONNECT);
- /* TODO: Should kernel panic here? */
- pci_info(dev, "AER: Device recovery failed\n");
-}
+EXPORT_SYMBOL_GPL(pci_find_aer_service);

This is never called from a module, so I don't think you need to
export it at all. If you do, it should be a separate patch, not
buried in the middle of this big one.


got it, will see if its really required to be exported.
but certainly, will remove it from this patch.

/**
* handle_error_source - handle logging error into an event log
diff --git a/drivers/pci/pcie/pcie-err.c b/drivers/pci/pcie/pcie-err.c
new file mode 100644
index 0000000..fcd5add
--- /dev/null
+++ b/drivers/pci/pcie/pcie-err.c
@@ -0,0 +1,334 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This file implements the error recovery as a core part of PCIe error reporting.
+ * When a PCIe error is delivered, an error message will be collected and printed
+ * to console, then, an error recovery procedure will be executed by following
+ * the PCI error recovery rules.

Wrap this so it fits in 80 columns.

I thought of keeping the way it was before (hence did not change it)
I would change it now.


+ * Copyright (C) 2006 Intel Corp.
+ * Tom Long Nguyen (tom.l.nguyen@xxxxxxxxx)
+ * Zhang Yanmin (yanmin.zhang@xxxxxxxxx)
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/aer.h>
+#include <linux/pcieport_if.h>
+#include "portdrv.h"
+
+struct aer_broadcast_data {
+ enum pci_channel_state state;
+ enum pci_ers_result result;
+};
+
+static pci_ers_result_t merge_result(enum pci_ers_result orig,
+ enum pci_ers_result new)
+{
+ if (new == PCI_ERS_RESULT_NO_AER_DRIVER)
+ return PCI_ERS_RESULT_NO_AER_DRIVER;
+
+ if (new == PCI_ERS_RESULT_NONE)
+ return orig;
+
+ switch (orig) {
+ case PCI_ERS_RESULT_CAN_RECOVER:
+ case PCI_ERS_RESULT_RECOVERED:
+ orig = new;
+ break;
+ case PCI_ERS_RESULT_DISCONNECT:
+ if (new == PCI_ERS_RESULT_NEED_RESET)
+ orig = PCI_ERS_RESULT_NEED_RESET;
+ break;
+ default:
+ break;
+ }
+
+ return orig;
+}
+
+static int report_mmio_enabled(struct pci_dev *dev, void *data)
+{
+ pci_ers_result_t vote;
+ const struct pci_error_handlers *err_handler;
+ struct aer_broadcast_data *result_data;
+
+ result_data = (struct aer_broadcast_data *) data;
+
+ device_lock(&dev->dev);
+ if (!dev->driver ||
+ !dev->driver->err_handler ||
+ !dev->driver->err_handler->mmio_enabled)
+ goto out;
+
+ err_handler = dev->driver->err_handler;
+ vote = err_handler->mmio_enabled(dev);
+ result_data->result = merge_result(result_data->result, vote);
+out:
+ device_unlock(&dev->dev);
+ return 0;
+}
+
+static int report_slot_reset(struct pci_dev *dev, void *data)
+{
+ pci_ers_result_t vote;
+ const struct pci_error_handlers *err_handler;
+ struct aer_broadcast_data *result_data;
+
+ result_data = (struct aer_broadcast_data *) data;
+
+ device_lock(&dev->dev);
+ if (!dev->driver ||
+ !dev->driver->err_handler ||
+ !dev->driver->err_handler->slot_reset)
+ goto out;
+
+ err_handler = dev->driver->err_handler;
+ vote = err_handler->slot_reset(dev);
+ result_data->result = merge_result(result_data->result, vote);
+out:
+ device_unlock(&dev->dev);
+ return 0;
+}
+
+static int report_resume(struct pci_dev *dev, void *data)
+{
+ const struct pci_error_handlers *err_handler;
+
+ device_lock(&dev->dev);
+ dev->error_state = pci_channel_io_normal;
+
+ if (!dev->driver ||
+ !dev->driver->err_handler ||
+ !dev->driver->err_handler->resume)
+ goto out;
+
+ err_handler = dev->driver->err_handler;
+ err_handler->resume(dev);
+out:
+ device_unlock(&dev->dev);
+ return 0;
+}
+
+static int report_error_detected(struct pci_dev *dev, void *data)
+{
+ pci_ers_result_t vote;
+ const struct pci_error_handlers *err_handler;
+ struct aer_broadcast_data *result_data;
+
+ result_data = (struct aer_broadcast_data *) data;
+
+ device_lock(&dev->dev);
+ dev->error_state = result_data->state;
+
+ if (!dev->driver ||
+ !dev->driver->err_handler ||
+ !dev->driver->err_handler->error_detected) {
+ if (result_data->state == pci_channel_io_frozen &&
+ dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
+ /*
+ * In case of fatal recovery, if one of down-
+ * stream device has no driver. We might be
+ * unable to recover because a later insmod
+ * of a driver for this device is unaware of
+ * its hw state.
+ */
+ dev_printk(KERN_DEBUG, &dev->dev, "device has %s\n",
+ dev->driver ?
+ "no error-aware driver" : "no driver");

This was a pci_printk() before you moved it and it should be the same here.


sure, will correct this.

+ }
+
+ /*
+ * If there's any device in the subtree that does not
+ * have an error_detected callback, returning
+ * PCI_ERS_RESULT_NO_AER_DRIVER prevents calling of
+ * the subsequent mmio_enabled/slot_reset/resume
+ * callbacks of "any" device in the subtree. All the
+ * devices in the subtree are left in the error state
+ * without recovery.
+ */
+
+ if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
+ vote = PCI_ERS_RESULT_NO_AER_DRIVER;
+ else
+ vote = PCI_ERS_RESULT_NONE;
+ } else {
+ err_handler = dev->driver->err_handler;
+ vote = err_handler->error_detected(dev, result_data->state);
+ }
+
+ result_data->result = merge_result(result_data->result, vote);
+ device_unlock(&dev->dev);
+ return 0;
+}
+
+/**
+ * default_reset_link - default reset function
+ * @dev: pointer to pci_dev data structure
+ *
+ * Invoked when performing link reset on a Downstream Port or a
+ * Root Port with no aer driver.
+ */
+static pci_ers_result_t default_reset_link(struct pci_dev *dev)
+{
+ pci_reset_bridge_secondary_bus(dev);
+ dev_printk(KERN_DEBUG, &dev->dev, "downstream link has been reset\n");

This should be a pci_printk() as it was before the move. There are more
below.


yes all will be corrected.
thanks.

+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+static pci_ers_result_t reset_link(struct pci_dev *dev)
+{
+ struct pci_dev *udev;
+ pci_ers_result_t status;
+ struct pcie_port_service_driver *driver = NULL;
+
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ /* Reset this port for all subordinates */
+ udev = dev;
+ } else {
+ /* Reset the upstream component (likely downstream port) */
+ udev = dev->bus->self;
+ }
+
+#if IS_ENABLED(CONFIG_PCIEAER)

AER can't be a module, so you can use just:

#ifdef CONFIG_PCIEAER

This ifdef should be added in the patch where you add a caller from non-AER
code. This patch should only move code, not change it.

ok, it can remain unchanged. but reset_link() is called by pcie_do_recovery()
and pcie_do_recovery can be called by various agents such as AER, DPC.
so let us say if DPC calls pcie_do_recovery, then DPC has no way of
knowing that AER is enabled or not.
in fact it should not know, but err.c/reset_link() should take care somehow.

I can make it a separate patch to do #ifdef CONFIG_PCIEAER inside reset_link()
or
I can add severity parameter in reset_link() so based on severity it
can find the service.

but I think you have comment to unify the find_aer_service and
find_dpc_service into a pcie_find_service (routine)
so I will see how I can club and take care of this comment. [without
the need of #ifdef]


+ /* Use the aer driver of the component firstly */
+ driver = pci_find_aer_service(udev);
+#endif
+
+ if (driver && driver->reset_link) {
+ status = driver->reset_link(udev);
+ } else if (udev->has_secondary_link) {
+ status = default_reset_link(udev);
+ } else {
+ dev_printk(KERN_DEBUG, &dev->dev,
+ "no link-reset support at upstream device %s\n",
+ pci_name(udev));
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ if (status != PCI_ERS_RESULT_RECOVERED) {
+ dev_printk(KERN_DEBUG, &dev->dev,
+ "link reset at upstream device %s failed\n",
+ pci_name(udev));
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ return status;
+}
+
+/**
+ * broadcast_error_message - handle message broadcast to downstream drivers
+ * @dev: pointer to where in a hierarchy message is broadcasted down
+ * @state: error state
+ * @error_mesg: message to print
+ * @cb: callback to be broadcast
+ *
+ * Invoked during error recovery process. Once being invoked, the content
+ * of error severity will be broadcast to all downstream drivers in a
+ * hierarchy in question.
+ */
+static pci_ers_result_t broadcast_error_message(struct pci_dev *dev,
+ enum pci_channel_state state,
+ char *error_mesg,
+ int (*cb)(struct pci_dev *, void *))
+{
+ struct aer_broadcast_data result_data;
+
+ dev_printk(KERN_DEBUG, &dev->dev, "broadcast %s message\n", error_mesg);
+ result_data.state = state;
+ if (cb == report_error_detected)
+ result_data.result = PCI_ERS_RESULT_CAN_RECOVER;
+ else
+ result_data.result = PCI_ERS_RESULT_RECOVERED;
+
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ /*
+ * If the error is reported by a bridge, we think this error
+ * is related to the downstream link of the bridge, so we
+ * do error recovery on all subordinates of the bridge instead
+ * of the bridge and clear the error status of the bridge.
+ */
+ if (cb == report_error_detected)
+ dev->error_state = state;
+ pci_walk_bus(dev->subordinate, cb, &result_data);
+ if (cb == report_resume) {
+ pci_cleanup_aer_uncorrect_error_status(dev);
+ dev->error_state = pci_channel_io_normal;
+ }
+ } else {
+ /*
+ * If the error is reported by an end point, we think this
+ * error is related to the upstream link of the end point.
+ */
+ pci_walk_bus(dev->bus, cb, &result_data);
+ }
+
+ return result_data.result;
+}
+
+/**
+ * pcie_do_recovery - handle nonfatal/fatal error recovery process
+ * @dev: pointer to a pci_dev data structure of agent detecting an error
+ * @severity: error severity type
+ *
+ * Invoked when an error is nonfatal/fatal. Once being invoked, broadcast
+ * error detected message to all downstream drivers within a hierarchy in
+ * question and return the returned code.
+ */
+void pcie_do_recovery(struct pci_dev *dev, int severity)
+{
+ pci_ers_result_t status, result = PCI_ERS_RESULT_RECOVERED;
+ enum pci_channel_state state;
+
+ if (severity == AER_FATAL)
+ state = pci_channel_io_frozen;
+ else
+ state = pci_channel_io_normal;
+
+ status = broadcast_error_message(dev,
+ state,
+ "error_detected",
+ report_error_detected);
+
+ if (severity == AER_FATAL) {
+ result = reset_link(dev);
+ if (result != PCI_ERS_RESULT_RECOVERED)
+ goto failed;
+ }
+
+ if (status == PCI_ERS_RESULT_CAN_RECOVER)
+ status = broadcast_error_message(dev,
+ state,
+ "mmio_enabled",
+ report_mmio_enabled);
+
+ if (status == PCI_ERS_RESULT_NEED_RESET) {
+ /*
+ * TODO: Should call platform-specific
+ * functions to reset slot before calling
+ * drivers' slot_reset callbacks?
+ */
+ status = broadcast_error_message(dev,
+ state,
+ "slot_reset",
+ report_slot_reset);
+ }
+
+ if (status != PCI_ERS_RESULT_RECOVERED)
+ goto failed;
+
+ broadcast_error_message(dev,
+ state,
+ "resume",
+ report_resume);
+
+ dev_info(&dev->dev, "Device recovery successful\n");
+ return;
+
+failed:
+ /* TODO: Should kernel panic here? */
+ dev_info(&dev->dev, "Device recovery failed\n");
+}
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h
index a854bc5..4f1992d 100644
--- a/drivers/pci/pcie/portdrv.h
+++ b/drivers/pci/pcie/portdrv.h
@@ -79,4 +79,5 @@ static inline void pcie_port_platform_notify(struct pci_dev *port, int *mask)
static inline void pcie_port_platform_notify(struct pci_dev *port, int *mask){}
#endif /* !CONFIG_ACPI */

+struct pcie_port_service_driver *pci_find_aer_service(struct pci_dev *dev);

Should be in a different patch, maybe the one where you rename it.

this can not be in a different patch I suppose, because this patch would not compile saying

error: implicit declaration of function âfind_aer_serviceâ [-Werror=implicit-function-declaration]
driver = find_aer_service(udev);

err.c calls find_aer_service() so it needs to find declaration somewhere.
Though I will make a separate patch renaming this as you suggested.


#endif /* _PORTDRV_H_ */
--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.,
a Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.