Re: [PATCH v2 1/2] irqchip: stm32: Optimizes and cleans up stm32-exti irq_domain

From: Ludovic BARRE
Date: Fri Feb 23 2018 - 11:17:17 EST




On 02/23/2018 04:46 PM, Ludovic BARRE wrote:
hi Radoslaw

The gpio-keys tests it's now functional on H7, great.
However the gpio-key test only the bank1 (like stm32f429).
Like the H7 introduce the multi-bank management,
we must perform complementary test.

comment below about ack in handler

On 02/23/2018 09:31 AM, Radoslaw Pietrzyk wrote:
- discards setting handle_simple_irq handler for hierarchy interrupts
- removes acking in chained irq handler as this is done by
irq_chip itself inside handle_edge_irq
- removes unneeded irq_domain_ops.xlate callback

Signed-off-by: Radoslaw Pietrzyk <radoslaw.pietrzyk@xxxxxxxxx>
---
 drivers/irqchip/irq-stm32-exti.c | 13 -------------
 1 file changed, 13 deletions(-)

diff --git a/drivers/irqchip/irq-stm32-exti.c b/drivers/irqchip/irq-stm32-exti.c
index 36f0fbe..8013a87 100644
--- a/drivers/irqchip/irq-stm32-exti.c
+++ b/drivers/irqchip/irq-stm32-exti.c
@@ -79,13 +79,6 @@ static unsigned long stm32_exti_pending(struct irq_chip_generic *gc)
ÂÂÂÂÂ return irq_reg_readl(gc, stm32_bank->pr_ofst);
 }
-static void stm32_exti_irq_ack(struct irq_chip_generic *gc, u32 mask)
-{
-ÂÂÂ const struct stm32_exti_bank *stm32_bank = gc->private;
-
-ÂÂÂ irq_reg_writel(gc, mask, stm32_bank->pr_ofst);
-}
-
 static void stm32_irq_handler(struct irq_desc *desc)
 {
ÂÂÂÂÂ struct irq_domain *domain = irq_desc_get_handler_data(desc);
@@ -106,7 +99,6 @@ static void stm32_irq_handler(struct irq_desc *desc)
ÂÂÂÂÂÂÂÂÂÂÂÂÂ for_each_set_bit(n, &pending, IRQS_PER_BANK) {
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ virq = irq_find_mapping(domain, irq_base + n);
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ generic_handle_irq(virq);
-ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ stm32_exti_irq_ack(gc, BIT(n));

the while loop " while ((pending = " has been introduce while original
upstream of this driver in V2 to V3
https://patchwork.ozlabs.org/patch/604190/
https://patchwork.ozlabs.org/patch/665242/

the "ack" is needed to acknowledge the irq which are handled and which is not the original irq for which we enter.

ÂÂÂÂÂÂÂÂÂÂÂÂÂ }
ÂÂÂÂÂÂÂÂÂ }
ÂÂÂÂÂ }
@@ -176,16 +168,12 @@ static int stm32_irq_set_wake(struct irq_data *data, unsigned int on)
 static int stm32_exti_alloc(struct irq_domain *d, unsigned int virq,
ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ unsigned int nr_irqs, void *data)
 {
-ÂÂÂ struct irq_chip_generic *gc;
ÂÂÂÂÂ struct irq_fwspec *fwspec = data;
ÂÂÂÂÂ irq_hw_number_t hwirq;
ÂÂÂÂÂ hwirq = fwspec->param[0];
-ÂÂÂ gc = irq_get_domain_generic_chip(d, hwirq);
ÂÂÂÂÂ irq_map_generic_chip(d, virq, hwirq);
-ÂÂÂ irq_domain_set_info(d, virq, hwirq, &gc->chip_types->chip, gc,
-ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ handle_simple_irq, NULL, NULL);

I see if it is not disturb the multi-bank.

you are right, normally irq_domain_set_info is already set in
irq_map_generic_chip.


ÂÂÂÂÂ return 0;
 }
@@ -200,7 +188,6 @@ static void stm32_exti_free(struct irq_domain *d, unsigned int virq,
 struct irq_domain_ops irq_exti_domain_ops = {
ÂÂÂÂÂ .mapÂÂÂ = irq_map_generic_chip,
-ÂÂÂ .xlateÂÂÂ = irq_domain_xlate_onetwocell,
 .alloc = stm32_exti_alloc,
ÂÂÂÂÂ .freeÂÂÂ = stm32_exti_free,
 };


BR
Ludo