[PATCH 19/19] clk: meson: use hhi syscon if available

From: Jerome Brunet
Date: Wed Jan 31 2018 - 13:10:27 EST


On gxbb and axg, try to get the hhi regmap from the parent DT node, which
should be the HHI system controller once the necessary changes have been
made in amlogic's DTs

Until then, if getting regmap through the system controller fails, the
clock controller will fall back to the old way, requesting memory region
directly and then registering the regmap itself.

This should allow a smooth transition to syscon

Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
---
drivers/clk/meson/Kconfig | 2 ++
drivers/clk/meson/axg.c | 43 ++++++++++++++++++++++++++++++-------------
drivers/clk/meson/gxbb.c | 39 ++++++++++++++++++++++++++++-----------
3 files changed, 60 insertions(+), 24 deletions(-)

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index 936afddae406..d5cbec522aec 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -22,6 +22,7 @@ config COMMON_CLK_GXBB
depends on COMMON_CLK_AMLOGIC
select RESET_CONTROLLER
select COMMON_CLK_REGMAP_MESON
+ select MFD_SYSCON
help
Support for the clock controller on AmLogic S905 devices, aka gxbb.
Say Y if you want peripherals and CPU frequency scaling to work.
@@ -31,6 +32,7 @@ config COMMON_CLK_AXG
depends on COMMON_CLK_AMLOGIC
select RESET_CONTROLLER
select COMMON_CLK_REGMAP_MESON
+ select MFD_SYSCON
help
Support for the clock controller on AmLogic A113D devices, aka axg.
Say Y if you want peripherals and CPU frequency scaling to work.
diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
index ae1dd35246f5..8c455f8c1d91 100644
--- a/drivers/clk/meson/axg.c
+++ b/drivers/clk/meson/axg.c
@@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>

@@ -850,25 +851,41 @@ static int axg_clkc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct resource *res;
- void __iomem *clk_base;
+ void __iomem *clk_base = NULL;
struct regmap *map;
int ret, i;

- /* Generic clocks and PLLs */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -EINVAL;
+ /* Get the hhi system controller node if available */
+ map = syscon_node_to_regmap(of_get_parent(dev->of_node));
+ if (IS_ERR(map)) {
+ dev_err(dev,
+ "failed to get HHI regmap - Trying obsolete regs\n");
+
+ /*
+ * FIXME: HHI registers should be accessed through
+ * the appropriate system controller. This is required because
+ * there is more than just clocks in this register space
+ *
+ * This fallback method is only provided temporarily until
+ * all the platform DTs are properly using the syscon node
+ */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+
+
+ clk_base = devm_ioremap(dev, res->start, resource_size(res));
+ if (!clk_base) {
+ dev_err(dev, "Unable to map clk base\n");
+ return -ENXIO;
+ }

- clk_base = devm_ioremap(dev, res->start, resource_size(res));
- if (!clk_base) {
- dev_err(dev, "Unable to map clk base\n");
- return -ENXIO;
+ map = devm_regmap_init_mmio(dev, clk_base,
+ &clkc_regmap_config);
+ if (IS_ERR(map))
+ return PTR_ERR(map);
}

- map = devm_regmap_init_mmio(dev, clk_base, &clkc_regmap_config);
- if (IS_ERR(map))
- return PTR_ERR(map);
-
/* Populate regmap for the regmap backed clocks */
for (i = 0; i < ARRAY_SIZE(axg_clk_regmaps); i++)
axg_clk_regmaps[i]->map = map;
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 92403ab2daf5..f9acd4015a1c 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -22,6 +22,7 @@
#include <linux/init.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>

@@ -2042,19 +2043,35 @@ static int gxbb_clkc_probe(struct platform_device *pdev)
if (!clkc_data)
return -EINVAL;

- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -EINVAL;
+ /* Get the hhi system controller node if available */
+ map = syscon_node_to_regmap(of_get_parent(dev->of_node));
+ if (IS_ERR(map)) {
+ dev_err(dev,
+ "failed to get HHI regmap - Trying obsolete regs\n");

- clk_base = devm_ioremap(dev, res->start, resource_size(res));
- if (!clk_base) {
- pr_err("%s: Unable to map clk base\n", __func__);
- return -ENXIO;
- }
+ /*
+ * FIXME: HHI registers should be accessed through
+ * the appropriate system controller. This is required because
+ * there is more than just clocks in this register space
+ *
+ * This fallback method is only provided temporarily until
+ * all the platform DTs are properly using the syscon node
+ */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+
+ clk_base = devm_ioremap(dev, res->start, resource_size(res));
+ if (!clk_base) {
+ dev_err(dev, "Unable to map clk base\n");
+ return -ENXIO;
+ }

- map = devm_regmap_init_mmio(dev, clk_base, &clkc_regmap_config);
- if (IS_ERR(map))
- return PTR_ERR(map);
+ map = devm_regmap_init_mmio(dev, clk_base,
+ &clkc_regmap_config);
+ if (IS_ERR(map))
+ return PTR_ERR(map);
+ }

/* Populate regmap for the common regmap backed clocks */
for (i = 0; i < ARRAY_SIZE(gx_clk_regmaps); i++)
--
2.14.3