[PATCH 3/4] arm64: dts: rockchip: add Haikou baseboard with RK3368-uQ7 SoM

From: Klaus Goger
Date: Tue Jan 30 2018 - 07:40:20 EST


Haikou is a Qseven and ÎQseven baseboard used in Theobroma Systems
evaluation kits. This dts adds a version for use with a RK3368-uQ7 SoM
called Lion.

Signed-off-by: Klaus Goger <klaus.goger@xxxxxxxxxxxxxxxxxxxxx>
---

.../arm64/boot/dts/rockchip/rk3368-lion-haikou.dts | 146 +++++++++++++++++++++
1 file changed, 146 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts

diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
new file mode 100644
index 000000000000..795f5f5eeaf4
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "rk3368-lion.dtsi"
+
+/ {
+ model = "Theobroma Systems RK3368-uQ7 Baseboard";
+ compatible = "tsd,rk3368-lion-haikou", "rockchip,rk3368";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ i2cmux2 {
+ i2c@0 {
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c01";
+ pagesize = <8>;
+ reg = <0x50>;
+ };
+ };
+ };
+
+ leds {
+ pinctrl-0 = <&led_pins_module>, <&led_sd_haikou>;
+
+ sd-card-led {
+ label = "sd_card_led";
+ gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ dc_12v: dc-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc3v3_baseboard: vcc3v3-baseboard {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_baseboard";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc5v0_otg: vcc5v0-otg-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&otg_vbus_drv>;
+ regulator-name = "vcc5v0_otg";
+ regulator-always-on;
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <25000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ rockchip,default-sample-phase = <90>;
+ vmmc-supply = <&vcc3v3_baseboard>;
+ status = "okay";
+};
+
+&spi2 {
+ cs-gpios = <0>, <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "okay";
+};
+
+&uart1 {
+ /* alternate function of GPIO5/6 */
+ status = "disabled";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&haikou_pin_hog>;
+
+ hog {
+ haikou_pin_hog: haikou-pin-hog {
+ rockchip,pins =
+ /* LID_BTN */
+ <RK_GPIO3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+ /* BATLOW# */
+ <RK_GPIO0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
+ /* SLP_BTN# */
+ <RK_GPIO3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+ /* BIOS_DISABLE# */
+ <RK_GPIO3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ led_sd_haikou: led-sd-gpio {
+ rockchip,pins =
+ <RK_GPIO0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_cd_gpio: sdmmc-cd-gpio {
+ rockchip,pins =
+ <RK_GPIO2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb_otg {
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins =
+ <RK_GPIO0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
--
2.11.0