Re: [linux-sunxi] [PATCH 13/16] arm: dts: sun8i: h3: add thermal zone to H3
From: Philipp Rossak
Date: Fri Jan 26 2018 - 12:48:52 EST
On 26.01.2018 17:26, Samuel Holland wrote:
On 01/26/18 09:19, Philipp Rossak wrote:
This patch adds the thermal zones to the H3. We have only one sensor and
that is placed in the cpu.
Signed-off-by: Philipp Rossak <embed3d@xxxxxxxxx>
---
arch/arm/boot/dts/sun8i-h3.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index fbb007e5798e..3f83f6a27c74 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -72,6 +72,15 @@
};
};
+ thermal-zones {
+ cpu-thermal {
+ /* milliseconds */
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&ths 0>;
If #thermal-sensor-cells = <0>, shouldn't this just be <&ths> ?
I think both works, but I my intention was to have an accurate
description in DT.
I thought that that is important in DT.
+ };
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
Thanks,
Samuel
Regards,
Philipp