Re: [PATCH v2] arm64: allwinner: a64: orangepi-zero-plus2: add usb otg

From: Maxime Ripard
Date: Mon Jan 15 2018 - 03:01:46 EST


Hi,

On Fri, Jan 12, 2018 at 02:39:04PM +0530, Jagan Teki wrote:
> Add usb otg support for orangepi-zero-plus2 board:
> - Add usb_otg node with dr_mode as 'otg'
> - USB0-IDDET connected to PA21
> - VBUS connected through DCIN which always on
>
> Tested mass storage function.
>
> Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> ---
> Changes for v2:
> - Change dr_mode to peripheral
>
> .../dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
> index af43533..6511190 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
> @@ -73,6 +73,10 @@
> };
> };
>
> +&ehci0 {
> + status = "okay";
> +};
> +
> &mmc0 {
> pinctrl-names = "default";
> pinctrl-0 = <&mmc0_pins_a>;
> @@ -111,6 +115,10 @@
> status = "okay";
> };
>
> +&ohci0 {
> + status = "okay";
> +};
> +
> &uart0 {
> pinctrl-names = "default";
> pinctrl-0 = <&uart0_pins_a>;
> @@ -122,3 +130,13 @@
> pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
> status = "okay";
> };
> +
> +&usb_otg {
> + dr_mode = "peripheral";

If VBUS is always on, this can only operate safely in host mode, not
peripheral.

Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Attachment: signature.asc
Description: PGP signature