[PATCH V2 net-next 05/11] net: hns3: refactor interrupt coalescing init function

[Peng Li]

From: Fuyun Liang <liangfuyun1@xxxxxxxxxx>

In the hardware, the coalesce configurable registers include GL0, GL1,
GL2. In the driver, the TX queues use the register GL1 and the RX queues
use the register GL0. This function initializes the configuration of the
interrupt coalescing, but does not distinguish between the TX direction
and the RX direction. It will cause some confusion.

This patch refactors the function to initialize the TX GL and the RX GL
separately. And the initialization of related variables also is added to
this patch.

Signed-off-by: Fuyun Liang <liangfuyun1@xxxxxxxxxx>
Signed-off-by: Peng Li <lipeng321@xxxxxxxxxx>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 29 +++++++++++++++++--------
 1 file changed, 20 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 32c9f88..59d8d9f 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -206,21 +206,32 @@ void hns3_set_vector_coalesce_tx_gl(struct hns3_enet_tqp_vector *tqp_vector,
 	writel(tx_gl_reg, tqp_vector->mask_addr + HNS3_VECTOR_GL1_OFFSET);
 }
 
-static void hns3_vector_gl_rl_init(struct hns3_enet_tqp_vector *tqp_vector)
+static void hns3_vector_gl_rl_init(struct hns3_enet_tqp_vector *tqp_vector,
+				   struct hns3_nic_priv *priv)
 {
+	struct hnae3_handle *h = priv->ae_handle;
+
 	/* initialize the configuration for interrupt coalescing.
 	 * 1. GL (Interrupt Gap Limiter)
 	 * 2. RL (Interrupt Rate Limiter)
 	 */
 
-	/* Default :enable interrupt coalesce */
-	tqp_vector->rx_group.int_gl = HNS3_INT_GL_50K;
+	/* Default: enable interrupt coalescing self-adaptive and GL */
+	tqp_vector->tx_group.gl_adapt_enable = 1;
+	tqp_vector->rx_group.gl_adapt_enable = 1;
+
 	tqp_vector->tx_group.int_gl = HNS3_INT_GL_50K;
-	hns3_set_vector_coalesc_gl(tqp_vector, HNS3_INT_GL_50K);
-	/* for now we are disabling Interrupt RL - we
-	 * will re-enable later
-	 */
-	hns3_set_vector_coalesce_rl(tqp_vector, 0);
+	tqp_vector->rx_group.int_gl = HNS3_INT_GL_50K;
+
+	hns3_set_vector_coalesce_tx_gl(tqp_vector,
+				       tqp_vector->tx_group.int_gl);
+	hns3_set_vector_coalesce_rx_gl(tqp_vector,
+				       tqp_vector->rx_group.int_gl);
+
+	/* Default: disable RL */
+	h->kinfo.int_rl_setting = 0;
+	hns3_set_vector_coalesce_rl(tqp_vector, h->kinfo.int_rl_setting);
+
 	tqp_vector->rx_group.flow_level = HNS3_FLOW_LOW;
 	tqp_vector->tx_group.flow_level = HNS3_FLOW_LOW;
 }
@@ -2654,7 +2665,7 @@ static int hns3_nic_init_vector_data(struct hns3_nic_priv *priv)
 		tqp_vector->rx_group.total_packets = 0;
 		tqp_vector->tx_group.total_bytes = 0;
 		tqp_vector->tx_group.total_packets = 0;
-		hns3_vector_gl_rl_init(tqp_vector);
+		hns3_vector_gl_rl_init(tqp_vector, priv);
 		tqp_vector->handle = h;
 
 		ret = hns3_get_vector_ring_chain(tqp_vector,
-- 
1.9.1