[PATCH v2 6/8] remoteproc: Move resource table load logic to find

From: Bjorn Andersson
Date: Fri Jan 05 2018 - 18:58:30 EST


Extend the previous operation of finding the resource table in the ELF
with the extra step of populating the rproc struct with a copy and the
size. This allows drivers to override the mechanism used for acquiring
the resource table, or omit it for firmware that is known not to have a
resource table.

This leaves the custom, dummy, find_rsc_table implementations found in
some drivers dangling.

Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---

Changes since v1:
- None

drivers/remoteproc/remoteproc_core.c | 32 ++++++--------------------
drivers/remoteproc/remoteproc_elf_loader.c | 37 ++++++++++++++++++------------
drivers/remoteproc/remoteproc_internal.h | 16 +++++--------
include/linux/remoteproc.h | 2 ++
4 files changed, 37 insertions(+), 50 deletions(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 3160cfe897da..84e07d5b7c2c 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -907,8 +907,7 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
{
struct device *dev = &rproc->dev;
const char *name = rproc->firmware;
- struct resource_table *table;
- int ret, tablesz;
+ int ret;

ret = rproc_fw_sanity_check(rproc, fw);
if (ret)
@@ -927,27 +926,11 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
}

rproc->bootaddr = rproc_get_boot_addr(rproc, fw);
- ret = -EINVAL;
-
- /* look for the resource table */
- table = rproc_find_rsc_table(rproc, fw, &tablesz);
- if (!table) {
- dev_err(dev, "Failed to find resource table\n");
- goto clean_up;
- }
-
- /*
- * Create a copy of the resource table. When a virtio device starts
- * and calls vring_new_virtqueue() the address of the allocated vring
- * will be stored in the cached_table. Before the device is started,
- * cached_table will be copied into device memory.
- */
- rproc->cached_table = kmemdup(table, tablesz, GFP_KERNEL);
- if (!rproc->cached_table)
- goto clean_up;

- rproc->table_ptr = rproc->cached_table;
- rproc->table_sz = tablesz;
+ /* load resource table */
+ ret = rproc_load_rsc_table(rproc, fw);
+ if (ret)
+ goto disable_iommu;

/* reset max_notifyid */
rproc->max_notifyid = -1;
@@ -967,11 +950,10 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)

clean_up_resources:
rproc_resource_cleanup(rproc);
-clean_up:
kfree(rproc->cached_table);
rproc->cached_table = NULL;
rproc->table_ptr = NULL;
-
+disable_iommu:
rproc_disable_iommu(rproc);
return ret;
}
@@ -1443,7 +1425,7 @@ struct rproc *rproc_alloc(struct device *dev, const char *name,
/* Default to ELF loader if no load function is specified */
if (!rproc->ops->load) {
rproc->ops->load = rproc_elf_load_segments;
- rproc->ops->find_rsc_table = rproc_elf_find_rsc_table;
+ rproc->ops->load_rsc_table = rproc_elf_load_rsc_table;
rproc->ops->find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table;
rproc->ops->sanity_check = rproc_elf_sanity_check;
rproc->ops->get_boot_addr = rproc_elf_get_boot_addr;
diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c
index 822fa1bf893f..b17d72ec8603 100644
--- a/drivers/remoteproc/remoteproc_elf_loader.c
+++ b/drivers/remoteproc/remoteproc_elf_loader.c
@@ -268,42 +268,49 @@ find_table(struct device *dev, struct elf32_hdr *ehdr, size_t fw_size)
}

/**
- * rproc_elf_find_rsc_table() - find the resource table
+ * rproc_elf_load_rsc_table() - load the resource table
* @rproc: the rproc handle
* @fw: the ELF firmware image
- * @tablesz: place holder for providing back the table size
*
* This function finds the resource table inside the remote processor's
- * firmware. It is used both upon the registration of @rproc (in order
- * to look for and register the supported virito devices), and when the
- * @rproc is booted.
+ * firmware, load it into the @cached_table and update @table_ptr.
*
- * Returns the pointer to the resource table if it is found, and write its
- * size into @tablesz. If a valid table isn't found, NULL is returned
- * (and @tablesz isn't set).
+ * Return: 0 on success, negative errno on failure.
*/
-struct resource_table *rproc_elf_find_rsc_table(struct rproc *rproc,
- const struct firmware *fw,
- int *tablesz)
+int rproc_elf_load_rsc_table(struct rproc *rproc, const struct firmware *fw)
{
struct elf32_hdr *ehdr;
struct elf32_shdr *shdr;
struct device *dev = &rproc->dev;
struct resource_table *table = NULL;
const u8 *elf_data = fw->data;
+ size_t tablesz;

ehdr = (struct elf32_hdr *)elf_data;

shdr = find_table(dev, ehdr, fw->size);
if (!shdr)
- return NULL;
+ return -EINVAL;

table = (struct resource_table *)(elf_data + shdr->sh_offset);
- *tablesz = shdr->sh_size;
+ tablesz = shdr->sh_size;
+
+ /*
+ * Create a copy of the resource table. When a virtio device starts
+ * and calls vring_new_virtqueue() the address of the allocated vring
+ * will be stored in the cached_table. Before the device is started,
+ * cached_table will be copied into device memory.
+ */
+ rproc->cached_table = kmemdup(table, tablesz, GFP_KERNEL);
+ if (!rproc->cached_table)
+ return -ENOMEM;

- return table;
+ rproc->table_ptr = rproc->cached_table;
+ rproc->table_sz = tablesz;
+
+ return 0;
}
-EXPORT_SYMBOL(rproc_elf_find_rsc_table);
+EXPORT_SYMBOL(rproc_elf_load_rsc_table);

/**
* rproc_elf_find_loaded_rsc_table() - find the loaded resource table
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index a42690c514e2..55a2950c5cb7 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -57,9 +57,7 @@ int rproc_trigger_recovery(struct rproc *rproc);
int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw);
u32 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw);
int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw);
-struct resource_table *rproc_elf_find_rsc_table(struct rproc *rproc,
- const struct firmware *fw,
- int *tablesz);
+int rproc_elf_load_rsc_table(struct rproc *rproc, const struct firmware *fw);
struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc,
const struct firmware *fw);

@@ -90,15 +88,13 @@ int rproc_load_segments(struct rproc *rproc, const struct firmware *fw)
return -EINVAL;
}

-static inline
-struct resource_table *rproc_find_rsc_table(struct rproc *rproc,
- const struct firmware *fw,
- int *tablesz)
+static inline int rproc_load_rsc_table(struct rproc *rproc,
+ const struct firmware *fw)
{
- if (rproc->ops->find_rsc_table)
- return rproc->ops->find_rsc_table(rproc, fw, tablesz);
+ if (rproc->ops->load_rsc_table)
+ return rproc->ops->load_rsc_table(rproc, fw);

- return NULL;
+ return 0;
}

static inline
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index ca2021cf7b39..cc853745e3a1 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -332,6 +332,7 @@ struct firmware;
* @stop: power off the device
* @kick: kick a virtqueue (virtqueue id given as a parameter)
* @da_to_va: optional platform hook to perform address translations
+ * @load_rsc_table: load resource table from firmware image
* @find_rsc_table: find the resource table inside the firmware image
* @find_loaded_rsc_table: find the loaded resouce table
* @load: load firmeware to memory, where the remote processor
@@ -344,6 +345,7 @@ struct rproc_ops {
int (*stop)(struct rproc *rproc);
void (*kick)(struct rproc *rproc, int vqid);
void * (*da_to_va)(struct rproc *rproc, u64 da, int len);
+ int (*load_rsc_table)(struct rproc *rproc, const struct firmware *fw);
struct resource_table *(*find_rsc_table)(struct rproc *rproc,
const struct firmware *fw,
int *tablesz);
--
2.15.0