Re: [RFC PATCH v11 4/5] PCI / PM: Add support for the PCIe WAKE# signal for OF

[Tony Lindgren]

* Rafael J. Wysocki <rafael@xxxxxxxxxx> [171228 17:46]:
> 
> To be precise, it is not quite possible to figure out which WAKE#
> triggered, if they are sharing the line, without looking into the
> config spaces of the devices below the switch.  The switch is not
> expected to do that AFAICS.  It only generates a PME message meaning
> "wakeup is being signaled somewhere below" and the PME driver that
> handles the Root Port receiving it should look at the PME Status bits
> of the devices below the switch (the pme.c driver does that IIRC or at
> least it should do that ;-)).
> 
> Still, the handling of WAKE# doesn't need to cover this case AFAICS.

OK makes sense now.

Regards,

Tony