[PATCH 3/3] MIPS: Add barrier between icache flush and execution hazard barrier

[Matt Redfearn]

Hit-based icache operations may complete before the CM completes
intervention with the local L1. Thus code which invalidates the icache
and then attempts to execute those addresses must include a barrier to
prevent the scenario which:

  - icache instruction completes
  - icache fetch occurs
  - core executes icache data
  - CM completes icache invalidate

If the above were allowed to happen then the core would execute stale
instructions from the icache.

A barrier is required to prevent the core i-fetching before the icache
operation has completed. This goes together with the instruction_hazard
to ensure that the pipeline is stalled until the icache operation is
completed and the core will fetch the new instructions.

Suggested-by: Leonid Yegoshin <Leonid.Yegoshin@xxxxxxxx>
Signed-off-by: Matt Redfearn <matt.redfearn@xxxxxxxx>
Cc: Paul Burton <paul.burton@xxxxxxxx>
Cc: James Hogan <james.hogan@xxxxxxxx>
Cc: stable <stable@xxxxxxxxxxxxxxx> # v4.9+
---

 arch/mips/mm/c-r4k.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index b7186d47184b..844685e51109 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -763,6 +763,8 @@ static inline void __local_r4k_flush_icache_range(unsigned long start,
 			break;
 		}
 	}
+	/* Ensure icache operation has completed */
+	mb();
 	/* Hazard to force new i-fetch */
 	instruction_hazard();
 }
-- 
2.7.4