Re: [PATCH] USB: serial: option: adding support for YUGA CLM920-NC5

[BjÃrn Mork]

"SZ Lin (æäæ)" <SZ.Lin@xxxxxxxx> writes:
>> Johan Hovold <johan@xxxxxxxxxx> writes:
>> 
>> >> +static const struct option_blacklist_info yuga_clm920_nc5_blacklist = {
>> >> +	.reserved = BIT(0) | BIT(1) | BIT(4), };
>> >
>> > Do you really need to blacklist the first interface?
>> 
>> Good question. Interface #0 does look a lot like a Qualcomm DM/DIAG function, based
>> on two bulk endpoints, no additional descriptors and the fact that it is the first interface.
>> If so, then we do want a serial driver for it.  There is a basic libqcdm implementation in
>> ModemManager if you want to test it out.
>> 
>
> I have confirmed that interface #0 is QCDM/DIAG port in this module,
>and thus I will remove this from reserved list in next patch.
>Furthermore, interface #1 is ADB port. Should I also remove this from
>reserved list?

No. ADB is handled by userspace tools using libusb.  It should not be
bound to any serial driver, so you will need to blacklist it.  But you
need to keep the blacklist anyway to include the QCDM/DIAG port

I assume Johan's alternative was to match class/subclass/protocol
against ff/00/00, which would have worked if you only wanted to include
interfaces 2 and 3.

>> And I expect interface #4 is QMI/rmnet?  Feel free to confirm that assumption with a
>> patch against qmi_wwan :-)
>> 
> Yes, it is. I will send qmi_wwan patch by all means.

Thanks


BjÃrn