[PATCH v2] ARC: Force disable IOC if we don't want to use it

From: Alexey Brodkin
Date: Mon Dec 18 2017 - 10:29:30 EST


If software that was executed before Linux kernel [like boot-ROM or
bootloader] enabled IOC but we'd like to not use it [mostly for
debugging of weird DMA issues] we essentially need to disable IOC.
So we do here.

Note we will only disable IOC if "ioc_enable" variable is force set to 0.
As of today that's only possible either before building right in
arch/arc/mm/cache.c or via debugger on target reght before execution of
the kernel starts.

We may make "ioc_enable" a boot-parameter later though.

Signed-off-by: Alexey Brodkin <abrodkin@xxxxxxxxxxxx>
---

Chnages in v2:
* Now disabling really works as in v1 we never entered
disabling code if ioc_enable=0.
* Do nothing if IOC was not enabled

arch/arc/mm/cache.c | 42 ++++++++++++++++++++++++++++++++++++++++--
1 file changed, 40 insertions(+), 2 deletions(-)

diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index 69f77c113875..9cadf7b779ed 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -1186,6 +1186,40 @@ noinline void __init arc_ioc_setup(void)
__dc_enable();
}

+/*
+ * Disabling of IOC is quite a tricky action because
+ * nobody knows what happens if there're IOC-ahndled tarnsactions in flight
+ * when we're disabling IOC.
+ *
+ * And the problem is external DMA masters [that were initialized and set in a
+ * bootlaoder that was executed before we got here] might continue to send data
+ * to memory even at this point and we have no way to prevent that.
+ *
+ * That said it's much safer to not enable IOC at all anywhere before
+ * in boot-ROM, bootloader etc but if we do need to disable it in Linux kernel
+ * it should be done as early as possible and made by master core while all
+ * slaves aren't active.
+ *
+ */
+noinline void __init arc_ioc_disable(void)
+{
+ /* Exit if IOC was never enabled */
+ if (!read_aux_reg(ARC_REG_IO_COH_ENABLE))
+ return;
+
+ /* Flush + invalidate + disable L1 dcache */
+ __dc_disable();
+
+ /* Flush + invalidate SLC */
+ if (read_aux_reg(ARC_REG_SLC_BCR))
+ slc_entire_op(OP_FLUSH_N_INV);
+
+ write_aux_reg(ARC_REG_IO_COH_ENABLE, 0);
+
+ /* Re-enable L1 dcache */
+ __dc_enable();
+}
+
/*
* Cache related boot time checks/setups only needed on master CPU:
* - Geometry checks (kernel build and hardware agree: e.g. L1_CACHE_BYTES)
@@ -1247,8 +1281,12 @@ void __init arc_cache_init_master(void)
if (is_isa_arcv2() && l2_line_sz && !slc_enable)
arc_slc_disable();

- if (is_isa_arcv2() && ioc_enable)
- arc_ioc_setup();
+ if (is_isa_arcv2()) {
+ if (ioc_enable)
+ arc_ioc_setup();
+ else if (ioc_exists)
+ arc_ioc_disable();
+ }

if (is_isa_arcv2() && ioc_enable) {
__dma_cache_wback_inv = __dma_cache_wback_inv_ioc;
--
2.14.3