Re: [PATCH v6 2/5] dt-bindings: scsi: ufs: add document for hisi-ufs

From: Rob Herring
Date: Thu Dec 07 2017 - 18:35:56 EST


On Thu, Dec 07, 2017 at 06:20:23PM +0800, Li Wei wrote:
> add ufs node document for Hisilicon.
>
> Signed-off-by: Li Wei <liwei213@xxxxxxxxxx>
> ---

Version history?

> Documentation/devicetree/bindings/ufs/ufs-hisi.txt | 38 ++++++++++++++++++++++
> 1 file changed, 38 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/ufs/ufs-hisi.txt
>
> diff --git a/Documentation/devicetree/bindings/ufs/ufs-hisi.txt b/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
> new file mode 100644
> index 000000000000..73e10698960e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ufs/ufs-hisi.txt
> @@ -0,0 +1,38 @@
> +* Hisilicon Universal Flash Storage (UFS) Host Controller
> +
> +UFS nodes are defined to describe on-chip UFS hardware macro.
> +Each UFS Host Controller should have its own node.
> +
> +Required properties:
> +- compatible : compatible list, contains one of the following -
> + "hisilicon,hi3660-ufs", "jedec,ufs-1.1" for hisi ufs
> + host controller present on Hi36xx chipset.
> +- reg : should contain UFS register address space & UFS SYS CTRL register address,
> +- interrupt-parent : interrupt device
> +- interrupts : interrupt number
> +- clocks : List of phandle and clock specifier pairs
> +- clock-names : List of clock input name strings sorted in the same
> + order as the clocks property. "ref_clk", "phy_clk" is optional
> +- resets : reset node register, one reset the clk and the other reset the controller
> +- reset-names : describe reset node register
> +
> +Example:
> +
> + ufs: ufs@ff3b0000 {
> + compatible = "hisilicon,hi3660-ufs", "jedec,ufs-1.1";
> + /* 0: HCI standard */
> + /* 1: UFS SYS CTRL */
> + reg = <0x0 0xff3b0000 0x0 0x1000>,
> + <0x0 0xff3b1000 0x0 0x1000>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
> + <&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
> + clock-names = "ref_clk", "phy_clk";
> + freq-table-hz = <0 0>, <0 0>;

? Not documented.

> + /* offset: 0x84; bit: 12 */
> + /* offset: 0x84; bit: 7 */
> + resets = <&crg_rst 0x84 12>,
> + <&crg_rst 0x84 7>;
> + reset-names = "rst", "assert";
> + };
> --
> 2.15.0
>