[PATCH AUTOSEL for 4.14 074/135] platform/x86: hp_accel: Add quirk for HP ProBook 440 G4

From: alexander . levin
Date: Thu Dec 07 2017 - 13:01:22 EST


From: Osama Khan <osama.khan@xxxxxxxxxxxx>

[ Upstream commit 163ca80013aafb6dc9cb295de3db7aeab9ab43f8 ]

Added support for HP ProBook 440 G4 laptops by including the accelerometer
orientation quirk for that device. Testing was performed based on the
axis orientation guidelines here:
https://www.kernel.org/doc/Documentation/misc-devices/lis3lv02d
which states "If the left side is elevated, X increases (becomes positive)".

When tested, on lifting the left edge, x values became increasingly negative
thus indicating an inverted x-axis on the installed lis3lv02d chip.
This was compensated by adding an entry for this device in hp_accel.c
specifying the quirk as x_inverted. The patch was tested on a
ProBook 440 G4 device and x-axis as well as y and z-axis values are now
generated as per spec.

Signed-off-by: Osama Khan <osama.khan@xxxxxxxxxxxx>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx>
---
drivers/platform/x86/hp_accel.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c
index 493d8910a74e..7b12abe86b94 100644
--- a/drivers/platform/x86/hp_accel.c
+++ b/drivers/platform/x86/hp_accel.c
@@ -240,6 +240,7 @@ static const struct dmi_system_id lis3lv02d_dmi_ids[] = {
AXIS_DMI_MATCH("HDX18", "HP HDX 18", x_inverted),
AXIS_DMI_MATCH("HPB432x", "HP ProBook 432", xy_rotated_left),
AXIS_DMI_MATCH("HPB440G3", "HP ProBook 440 G3", x_inverted_usd),
+ AXIS_DMI_MATCH("HPB440G4", "HP ProBook 440 G4", x_inverted),
AXIS_DMI_MATCH("HPB442x", "HP ProBook 442", xy_rotated_left),
AXIS_DMI_MATCH("HPB452x", "HP ProBook 452", y_inverted),
AXIS_DMI_MATCH("HPB522x", "HP ProBook 522", xy_swap),
--
2.11.0