Re: [PATCH] power: ltc2941-battery-gauge: Disable continuous monitoring on shutdown

From: Sebastian Reichel
Date: Fri Dec 01 2017 - 10:42:19 EST


Hi,

On Thu, Nov 23, 2017 at 03:41:05PM +0100, Mike Looijmans wrote:
> The driver sets the fuel gauge to continuous monitoring on startup, for
> the models that support this. When the board shuts down, the chip remains
> in that mode, causing a few mA drain on the battery every 2 or 10 seconds.
>
> This patch registers a shutdown handler that turns off the monitoring to
> prevent this battery drain.
>
> Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
> ---

Thanks, queued. I wonder if you need a second patch to also disable
the monitoring for suspend (and re-enable on resume)?

-- Sebastian

> drivers/power/supply/ltc2941-battery-gauge.c | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/drivers/power/supply/ltc2941-battery-gauge.c b/drivers/power/supply/ltc2941-battery-gauge.c
> index 08e4fd9..4cfa3f0 100644
> --- a/drivers/power/supply/ltc2941-battery-gauge.c
> +++ b/drivers/power/supply/ltc2941-battery-gauge.c
> @@ -60,6 +60,7 @@ enum ltc294x_id {
> #define LTC294X_REG_CONTROL_PRESCALER_SET(x) \
> ((x << 3) & LTC294X_REG_CONTROL_PRESCALER_MASK)
> #define LTC294X_REG_CONTROL_ALCC_CONFIG_DISABLED 0
> +#define LTC294X_REG_CONTROL_ADC_DISABLE(x) ((x) & ~(BIT(7) | BIT(6)))
>
> struct ltc294x_info {
> struct i2c_client *client; /* I2C Client pointer */
> @@ -523,6 +524,29 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
> return 0;
> }
>
> +static void ltc294x_i2c_shutdown(struct i2c_client *client)
> +{
> + struct ltc294x_info *info = i2c_get_clientdata(client);
> + int ret;
> + u8 value;
> + u8 control;
> +
> + /* The LTC2941 does not need any special handling */
> + if (info->id == LTC2941_ID)
> + return;
> +
> + /* Read control register */
> + ret = ltc294x_read_regs(info->client, LTC294X_REG_CONTROL, &value, 1);
> + if (ret < 0)
> + return;
> +
> + /* Disable continuous ADC conversion as this drains the battery */
> + control = LTC294X_REG_CONTROL_ADC_DISABLE(value);
> + if (control != value)
> + ltc294x_write_regs(info->client, LTC294X_REG_CONTROL,
> + &control, 1);
> +}
> +
> #ifdef CONFIG_PM_SLEEP
>
> static int ltc294x_suspend(struct device *dev)
> @@ -589,6 +613,7 @@ static int ltc294x_resume(struct device *dev)
> },
> .probe = ltc294x_i2c_probe,
> .remove = ltc294x_i2c_remove,
> + .shutdown = ltc294x_i2c_shutdown,
> .id_table = ltc294x_i2c_id,
> };
> module_i2c_driver(ltc294x_driver);
> --
> 1.9.1
>

Attachment: signature.asc
Description: PGP signature