Re: [PATCH v8 0/5] Synopsys Designware HDMI Video Capture Controller + PHY

From: Jose Abreu
Date: Mon Nov 27 2017 - 09:19:04 EST


Hi Hans,

On 27-11-2017 12:05, Hans Verkuil wrote:
> Hi Jose,
>
> Sakari's work was merged. Can you make a v9? Then we can merge this for 4.16.

Yeah, I saw that. Unfortunately due to my schedule I don't have
the time now to make a v9. I will try to make a new version once
possible but I don't know if it will be ready for v4.16 ( and we
also need to consider review time ).

Best Regards,
Jose Miguel Abreu

>
> Thanks!
>
> Hans
>
> On 09/22/2017 02:53 PM, Hans Verkuil wrote:
>> Hi Jose,
>>
>> I'm going to mark this patch series as 'Changes Requested' since it depends on
>> Sakari's subnotifier work. Once that is accepted I assume you'll make a v9 on top
>> and then this can hopefully be merged.
>>
>> Regards,
>>
>> Hans
>>
>> On 10/07/17 17:46, Jose Abreu wrote:
>>> The Synopsys Designware HDMI RX controller is an HDMI receiver controller that
>>> is responsible to process digital data that comes from a phy. The final result
>>> is a stream of raw video data that can then be connected to a video DMA, for
>>> example, and transfered into RAM so that it can be displayed.
>>>
>>> The controller + phy available in this series natively support all HDMI 1.4 and
>>> HDMI 2.0 modes, including deep color. Although, the driver is quite in its
>>> initial stage and unfortunatelly only non deep color modes are supported. Also,
>>> audio is not yet supported in the driver (the controller has several audio
>>> output interfaces).
>>>
>>> Version 8 addresses review comments from Rob Herring regarding device tree
>>> bindings.
>>>
>>> I also added one patch for cec.h which is needed to fix build errors/warnings.
>>>
>>> This series depends on the patch at [1].
>>>
>>> This series was tested in a FPGA platform using an embedded platform called
>>> ARC AXS101.
>>>
>>> Jose Abreu (5):
>>> [media] cec.h: Add stub function for cec_register_cec_notifier()
>>> dt-bindings: media: Document Synopsys Designware HDMI RX
>>> MAINTAINERS: Add entry for Synopsys Designware HDMI drivers
>>> [media] platform: Add Synopsys Designware HDMI RX PHY e405 Driver
>>> [media] platform: Add Synopsys Designware HDMI RX Controller Driver
>>>
>>> Cc: Carlos Palminha <palminha@xxxxxxxxxxxx>
>>> Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
>>> Cc: Hans Verkuil <hans.verkuil@xxxxxxxxx>
>>> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
>>> Cc: Mark Rutland <mark.rutland@xxxxxxx>
>>> Cc: Sylwester Nawrocki <snawrocki@xxxxxxxxxx>
>>>
>>> [1] https://urldefense.proofpoint.com/v2/url?u=https-3A__patchwork.linuxtv.org_patch_41834_&d=DwIC-g&c=DPL6_X_6JkXFx7AXWqB0tg&r=WHDsc6kcWAl4i96Vm5hJ_19IJiuxx_p_Rzo2g-uHDKw&m=tFDR8q-niqA9NmwOe-TrIsUMRsdlCFuhK9BrjgBnrfE&s=LRBhbdZgYuMYDoE4DDs5uwO3BHci_7E4vp77UYn8Duo&e=
>>>
>>> .../devicetree/bindings/media/snps,dw-hdmi-rx.txt | 58 +
>>> MAINTAINERS | 7 +
>>> drivers/media/platform/Kconfig | 2 +
>>> drivers/media/platform/Makefile | 2 +
>>> drivers/media/platform/dwc/Kconfig | 23 +
>>> drivers/media/platform/dwc/Makefile | 2 +
>>> drivers/media/platform/dwc/dw-hdmi-phy-e405.c | 844 +++++++++
>>> drivers/media/platform/dwc/dw-hdmi-phy-e405.h | 63 +
>>> drivers/media/platform/dwc/dw-hdmi-rx.c | 1823 ++++++++++++++++++++
>>> drivers/media/platform/dwc/dw-hdmi-rx.h | 441 +++++
>>> include/media/cec.h | 8 +
>>> include/media/dwc/dw-hdmi-phy-pdata.h | 128 ++
>>> include/media/dwc/dw-hdmi-rx-pdata.h | 70 +
>>> 13 files changed, 3471 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt
>>> create mode 100644 drivers/media/platform/dwc/Kconfig
>>> create mode 100644 drivers/media/platform/dwc/Makefile
>>> create mode 100644 drivers/media/platform/dwc/dw-hdmi-phy-e405.c
>>> create mode 100644 drivers/media/platform/dwc/dw-hdmi-phy-e405.h
>>> create mode 100644 drivers/media/platform/dwc/dw-hdmi-rx.c
>>> create mode 100644 drivers/media/platform/dwc/dw-hdmi-rx.h
>>> create mode 100644 include/media/dwc/dw-hdmi-phy-pdata.h
>>> create mode 100644 include/media/dwc/dw-hdmi-rx-pdata.h
>>>