[PATCH V1 3/4] usb: serial: f81534: add output pin control

From: Ji-Ze Hong (Peter Hong)
Date: Thu Nov 16 2017 - 02:46:44 EST


The F81532/534 had 3 output pin (M0/SD, M1, M2) with open-drain mode to
control transceiver. We'll read it from internal Flash with address
0x2f05~0x2f08 for 4 ports. The value is range from 0 to 7. The M0/SD is
MSB of this value. For a examples, If read value is 6, we'll write M0/SD,
M1, M2 as 1, 1, 0.

Register mapping for output value:
Port 0:
M2: 0x2ae8 bit7, M1: 0x2a90 bit5, M0/SD: 0x2a90 bit4
Port 1:
M2: 0x2ae8 bit6, M1: 0x2ae8 bit0, M0/SD: 0x2ae8 bit3
Port 2:
M2: 0x2a90 bit0, M1: 0x2ae8 bit2, M0/SD: 0x2a80 bit6
Port 3:
M2: 0x2a90 bit3, M1: 0x2a90 bit2, M0/SD: 0x2a90 bit1

Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@xxxxxxxxx>
---
drivers/usb/serial/f81534.c | 67 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 66 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c
index b2d10309c335..30b966d71ae8 100644
--- a/drivers/usb/serial/f81534.c
+++ b/drivers/usb/serial/f81534.c
@@ -56,6 +56,7 @@
#define F81534_CUSTOM_NO_CUSTOM_DATA 0xff
#define F81534_CUSTOM_VALID_TOKEN 0xf0
#define F81534_CONF_OFFSET 1
+#define F81534_CONF_GPIO_OFFSET 4

#define F81534_MAX_DATA_BLOCK 64
#define F81534_MAX_BUS_RETRY 20
@@ -166,6 +167,23 @@ struct f81534_port_private {
u8 phy_num;
};

+struct f81534_pin_data {
+ const u16 reg_addr;
+ const u16 reg_mask;
+};
+
+struct f81534_port_out_pin {
+ struct f81534_pin_data pin[3];
+};
+
+/* Pin output value for M2/M1/M0(SD) */
+static const struct f81534_port_out_pin f81534_port_out_pins[] = {
+ {{{0x2ae8, BIT(7)}, {0x2a90, BIT(5)}, {0x2a90, BIT(4) } } },
+ {{{0x2ae8, BIT(6)}, {0x2ae8, BIT(0)}, {0x2ae8, BIT(3) } } },
+ {{{0x2a90, BIT(0)}, {0x2ae8, BIT(2)}, {0x2a80, BIT(6) } } },
+ {{{0x2a90, BIT(3)}, {0x2a90, BIT(2)}, {0x2a90, BIT(1) } } },
+};
+
static int f81534_logic_to_phy_port(struct usb_serial *serial,
struct usb_serial_port *port)
{
@@ -271,6 +289,22 @@ static int f81534_get_register(struct usb_serial *serial, u16 reg, u8 *data)
return status;
}

+static int f81534_set_mask_register(struct usb_serial *serial, u16 reg,
+ u8 mask, u8 data)
+{
+ int status;
+ u8 tmp;
+
+ status = f81534_get_register(serial, reg, &tmp);
+ if (status)
+ return status;
+
+ tmp &= ~mask;
+ tmp |= (mask & data);
+
+ return f81534_set_register(serial, reg, tmp);
+}
+
static int f81534_set_port_register(struct usb_serial_port *port, u16 reg,
u8 data)
{
@@ -1299,6 +1333,37 @@ static void f81534_lsr_worker(struct work_struct *work)
dev_warn(&port->dev, "read LSR failed: %d\n", status);
}

+static int f81534_set_port_output_pin(struct usb_serial_port *port)
+{
+ struct f81534_serial_private *serial_priv;
+ struct f81534_port_private *port_priv;
+ struct usb_serial *serial;
+ const struct f81534_port_out_pin *pins;
+ int status;
+ int i;
+ u8 value;
+ u8 idx;
+
+ serial = port->serial;
+ serial_priv = usb_get_serial_data(serial);
+ port_priv = usb_get_serial_port_data(port);
+
+ idx = F81534_CONF_GPIO_OFFSET + port_priv->phy_num;
+ value = serial_priv->conf_data[idx];
+ pins = &f81534_port_out_pins[port_priv->phy_num];
+
+ for (i = 0; i < ARRAY_SIZE(pins->pin); ++i) {
+ status = f81534_set_mask_register(serial,
+ pins->pin[i].reg_addr, pins->pin[i].reg_mask,
+ value & BIT(i) ? pins->pin[i].reg_mask : 0);
+ if (status)
+ return status;
+ }
+
+ dev_info(&port->dev, "Output pin (M0/M1/M2): %d\n", value);
+ return 0;
+}
+
static int f81534_port_probe(struct usb_serial_port *port)
{
struct f81534_serial_private *serial_priv;
@@ -1354,7 +1419,7 @@ static int f81534_port_probe(struct usb_serial_port *port)
break;
}

- return 0;
+ return f81534_set_port_output_pin(port);
}

static int f81534_port_remove(struct usb_serial_port *port)
--
2.7.4