[PATCH] mfd: tmio: move register macros to tmio_core.c

From: Masahiro Yamada
Date: Tue Nov 07 2017 - 03:17:16 EST


These registers are only used in drivers/mfd/tmio_core.c

Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
---

drivers/mfd/tmio_core.c | 20 ++++++++++++++++++++
include/linux/mfd/tmio.h | 20 --------------------
2 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/drivers/mfd/tmio_core.c b/drivers/mfd/tmio_core.c
index 83af78c..ebf54cc 100644
--- a/drivers/mfd/tmio_core.c
+++ b/drivers/mfd/tmio_core.c
@@ -9,6 +9,26 @@
#include <linux/export.h>
#include <linux/mfd/tmio.h>

+#define CNF_CMD 0x04
+#define CNF_CTL_BASE 0x10
+#define CNF_INT_PIN 0x3d
+#define CNF_STOP_CLK_CTL 0x40
+#define CNF_GCLK_CTL 0x41
+#define CNF_SD_CLK_MODE 0x42
+#define CNF_PIN_STATUS 0x44
+#define CNF_PWR_CTL_1 0x48
+#define CNF_PWR_CTL_2 0x49
+#define CNF_PWR_CTL_3 0x4a
+#define CNF_CARD_DETECT_MODE 0x4c
+#define CNF_SD_SLOT 0x50
+#define CNF_EXT_GCLK_CTL_1 0xf0
+#define CNF_EXT_GCLK_CTL_2 0xf1
+#define CNF_EXT_GCLK_CTL_3 0xf9
+#define CNF_SD_LED_EN_1 0xfa
+#define CNF_SD_LED_EN_2 0xfe
+
+#define SDCREN 0x2 /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
+
int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base)
{
/* Enable the MMC/SD Control registers */
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index e1cfe91..396a103c 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -25,26 +25,6 @@
writew((val) >> 16, (addr) + 2); \
} while (0)

-#define CNF_CMD 0x04
-#define CNF_CTL_BASE 0x10
-#define CNF_INT_PIN 0x3d
-#define CNF_STOP_CLK_CTL 0x40
-#define CNF_GCLK_CTL 0x41
-#define CNF_SD_CLK_MODE 0x42
-#define CNF_PIN_STATUS 0x44
-#define CNF_PWR_CTL_1 0x48
-#define CNF_PWR_CTL_2 0x49
-#define CNF_PWR_CTL_3 0x4a
-#define CNF_CARD_DETECT_MODE 0x4c
-#define CNF_SD_SLOT 0x50
-#define CNF_EXT_GCLK_CTL_1 0xf0
-#define CNF_EXT_GCLK_CTL_2 0xf1
-#define CNF_EXT_GCLK_CTL_3 0xf9
-#define CNF_SD_LED_EN_1 0xfa
-#define CNF_SD_LED_EN_2 0xfe
-
-#define SDCREN 0x2 /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
-
#define sd_config_write8(base, shift, reg, val) \
tmio_iowrite8((val), (base) + ((reg) << (shift)))
#define sd_config_write16(base, shift, reg, val) \
--
2.7.4