Re: [PATCH 1/2] drivers: hwmon: Add W83773G driver

From: Guenter Roeck
Date: Sat Nov 04 2017 - 15:30:29 EST


On 11/01/2017 11:33 PM, Lei YU wrote:
Nuvoton W83773G is a hardware monitor IC providing one local
temperature and two remote temperature sensors.


I agree that a separate driver for this chip make sense.
Some work to do, though. This is only an initial review; later versions
will probably trigger additional feedback.

Please provide a register dump for the chip so I can write a unit test.

Signed-off-by: Lei YU <mine260309@xxxxxxxxx>
---
drivers/hwmon/Kconfig | 11 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/w83773g.c | 276 ++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 288 insertions(+)
create mode 100644 drivers/hwmon/w83773g.c

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index d654314..d148b70 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1710,6 +1710,17 @@ config SENSORS_VT8231
This driver can also be built as a module. If so, the module
will be called vt8231.
+config SENSORS_W83773G
+ tristate "Nuvoton W83773G"
+ depends on I2C
+ select HWMON_VID

Why ?

+ help
+ If you say yes here you get support for the Nuvoton W83773G hardware
+ monitoring chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called w83773g.
+
config SENSORS_W83781D
tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index c84d978..0649ad8 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_SENSORS_ATK0110) += asus_atk0110.o
# asb100, then w83781d go first, as they can override other drivers' addresses.
obj-$(CONFIG_SENSORS_ASB100) += asb100.o
obj-$(CONFIG_SENSORS_W83627HF) += w83627hf.o
+obj-$(CONFIG_SENSORS_W83773G) += w83773g.o
obj-$(CONFIG_SENSORS_W83792D) += w83792d.o
obj-$(CONFIG_SENSORS_W83793) += w83793.o
obj-$(CONFIG_SENSORS_W83795) += w83795.o
diff --git a/drivers/hwmon/w83773g.c b/drivers/hwmon/w83773g.c
new file mode 100644
index 0000000..16d5fa0
--- /dev/null
+++ b/drivers/hwmon/w83773g.c
@@ -0,0 +1,276 @@
+/*
+ * Copyright (C) 2017 IBM Corp.
+ *

This and the module author note below suggests that the driver was written
by someone else, yet there is no credit. Do you have permission from IBM
and from the author to publish this driver ?

+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
extra comment line

+ */
+
+/*
+ * Driver for the Nuvoton W83773G SMBus temperature sensor IC.
+ * Supported models: W83773G

Double comment.

+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/sysfs.h>

sysfs includes are unnecessary.

+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = { 0x4c, 0x4d, I2C_CLIENT_END };
+
+enum chips { w83773g };
+
The driver only supports one chip. This is unnecessary.

+/* The W83773 registers */
+#define W83773_CONVERSION_RATE_REG_READ 0x04
+#define W83773_CONVERSION_RATE_REG_WRITE 0x0A
+#define W83773_MANUFACTURER_ID_REG 0xFE
+#define W83773_LOCAL_TEMP 0x00

Please use tabs.

+
+static const u8 W83773_STATUS[2] = { 0x02, 0x17 };
+
+static const u8 W83773_TEMP_LSB[2] = { 0x10, 0x25 };
+static const u8 W83773_TEMP_MSB[2] = { 0x01, 0x24 };
+
+static const u8 W83773_OFFSET_LSB[2] = { 0x12, 0x16 };
+static const u8 W83773_OFFSET_MSB[2] = { 0x11, 0x15 };
+
+/* Manufacturer / Device ID's */
+#define W83773_MANUFACTURER_ID 0x5c
+
+
extra empty line

+/* this is the number of sensors in the device */
+static const struct i2c_device_id w83773_id[] = {
+ { "w83773g", 3 },

The 3 is pointless. There are always three channels.

+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, w83773_id);
+
+static const struct of_device_id w83773_of_match[] = {
+ {
+ .compatible = "nuvoton,w83773g",
+ .data = (void *)3

Same here.

+ },
+
+ { },
+};
+MODULE_DEVICE_TABLE(of, w83773_of_match);
+
+/*
+ * W83773G has 3 temp sensors:
+ * Channel 0 is the local sensor
+ * Channel 1-2 are two remote sensors
+ */
+struct w83773_data {
+ struct i2c_client *client;
+ struct mutex update_lock;
+ u32 temp_config[4];
+ struct hwmon_channel_info temp_info;
+ const struct hwmon_channel_info *info[2];
+ struct hwmon_chip_info chip;

AFAICS the channel and chip information is all static.
I don't see a reason for keeping it as variables.

+ bool valid;
+ unsigned long last_updated;
+ int channels;
+ s8 temp_local;
+ s8 status[2];
+ s8 temp_hb[2];
+ s8 temp_lb[2];
+ s8 offset_hb[2];
+ s8 offset_lb[2];

Please drop register caching in the driver. Use regmap to cache non-volatile registers.

+};
+
+static long temp_of_local(s8 reg)
+{
+ return reg * 1000;
+}
+
+static long temp_of_remote(s8 hb, s8 lb, s8 offset_hb, s8 offset_lb)
+{
+ return (hb + offset_hb) * 1000 + ((u8)(lb + offset_lb) >> 5) * 125;

This is wrong. The chip applies offsets internally, and reports adjusted temperatures
in its temperature registers.

+}
+
+
+static struct w83773_data *w83773_update_device(struct device *dev)
+{
+ struct w83773_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ int i;
+

As mentioned above, please drop the local cache and use regmap to cache non-volatile registers.

+ mutex_lock(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
+ data->temp_local = i2c_smbus_read_byte_data(client, W83773_LOCAL_TEMP);
+ for (i = 0; i < data->channels - 1; i++) {
+ data->status[i] = i2c_smbus_read_byte_data(client, W83773_STATUS[i]);
+ data->temp_hb[i] = i2c_smbus_read_byte_data(client, W83773_TEMP_MSB[i]);
+ data->temp_lb[i] = i2c_smbus_read_byte_data(client, W83773_TEMP_LSB[i]);
+ data->offset_hb[i] = i2c_smbus_read_byte_data(client, W83773_OFFSET_MSB[i]);
+ data->offset_lb[i] = i2c_smbus_read_byte_data(client, W83773_OFFSET_LSB[i]);
+ }
+ data->last_updated = jiffies;
+ data->valid = true;
+ }
+
+ mutex_unlock(&data->update_lock);
+
+ return data;
+}
+
+static int w83773_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct w83773_data *w83773 = w83773_update_device(dev);
+
+ switch (attr) {
+ case hwmon_temp_input:
+ if (channel == 0) {
+ /* channel 0 is the local temp */
+ *val = temp_of_local(w83773->temp_local);
+ }
+ else {

Please run checkpatch --strict on your patch and follow kernel coding
style.

+ /* channel 1-2 are the remote temps */
+ channel--;
+ *val = temp_of_remote(
+ w83773->temp_hb[channel],
+ w83773->temp_lb[channel],
+ w83773->offset_hb[channel],
+ w83773->offset_lb[channel]);
+ }
+ return 0;

Missing:
hwmon_temp_offset
hwmon_chip_update_interval (for conversion rate)

Both attributes should be writable.

+ case hwmon_temp_fault:
+ if (channel == 0)
+ *val = 0;

Should never get here. Channel 0 does not report faults, and there should be
no fault attribute for that channel.

+ else
+ /* Check the status register bit 2 for faults */
+ *val = (w83773->status[channel - 1] & 0x04) >> 2;
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+}
+
+static umode_t w83773_is_visible(const void *data, enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ switch (attr) {
+ case hwmon_temp_fault:
+ if (channel == 0)
+ return 0;
+ return S_IRUGO;
+ case hwmon_temp_input:
+ return S_IRUGO;

Symbolic permissions ran out of favor. checkpatch will tell you.

+ default:
+ return 0;
+ }
+}
+
+static int w83773_init_client(struct i2c_client *client)
+{
+ /* Set the conversion rate to 2 Hz */
+ i2c_smbus_write_byte_data(client, W83773_CONVERSION_RATE_REG_WRITE, 0x05);
+
+ return 0;
+}
+
+static int w83773_detect(struct i2c_client *client,
+ struct i2c_board_info *info)
+{
+ enum chips kind;
+ struct i2c_adapter *adapter = client->adapter;
+ const char * const names[] = { "W83773G" };
+ u8 reg;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
+
+ reg = i2c_smbus_read_byte_data(client, W83773_MANUFACTURER_ID_REG);
+ if (reg != W83773_MANUFACTURER_ID)
+ return -ENODEV;
This is insufficient for automatic detection. Also check RDR and at least
the configuration register.

There does not seem to be a reliable means to distinguish the chip from
W83775G. Given that, I wonder if a detect function even makes sense;
I seriously doubt it. Does your application require it ? If not I would
suggest to drop the detect function.

+ reg = i2c_smbus_read_byte_data(client, W83773_CONVERSION_RATE_REG_READ);
+ if (reg & 0xf8)
+ return -ENODEV;
+
Bit 3 (8) is valid.

+ kind = w83773g;
+
+ strlcpy(info->type, w83773_id[kind].name, I2C_NAME_SIZE);
+ dev_info(&adapter->dev, "Detected Nuvoton %s chip at 0x%02x\n",
+ names[kind], client->addr);

All this kind stuff is unnecessary.

+
+ return 0;
+}
+
+static const struct hwmon_ops w83773_ops = {
+ .is_visible = w83773_is_visible,
+ .read = w83773_read,
+};
+
+static int w83773_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct device *hwmon_dev;
+ struct w83773_data *data;
+ int i, err;
+
+ data = devm_kzalloc(dev, sizeof(struct w83773_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ mutex_init(&data->update_lock);
+ if (client->dev.of_node)
+ data->channels = (int)of_device_get_match_data(&client->dev);
+ else
+ data->channels = id->driver_data;

channels is fixed. No need to keep it as variable; a define is just as good.

+ data->client = client;
+
+ err = w83773_init_client(client);
+ if (err)
+ return err;
+
+ for (i = 0; i < data->channels; i++)
+ data->temp_config[i] = HWMON_T_INPUT | HWMON_T_FAULT;
+
+ data->chip.ops = &w83773_ops;
+ data->chip.info = data->info;
+
+ data->info[0] = &data->temp_info;
+
+ data->temp_info.type = hwmon_temp;
+ data->temp_info.config = data->temp_config;
+
+ hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
+ data,
+ &data->chip,
+ NULL);
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static struct i2c_driver w83773_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "w83773g",
+ .of_match_table = of_match_ptr(w83773_of_match),
+ },
+ .probe = w83773_probe,
+ .id_table = w83773_id,
+ .detect = w83773_detect,
+ .address_list = normal_i2c,
+};
+
+module_i2c_driver(w83773_driver);
+
+MODULE_AUTHOR("Nickolaus Gruendler <ngruend@xxxxxxxxxx>");

Does Nickolaus know about the use of his name and e-mail address
and give permission ?

+MODULE_DESCRIPTION("W83773G temperature sensor driver");
+MODULE_LICENSE("GPL");