Re: [PATCH v9 02/10] dt-bindings: net: dwmac-sun8i: update documentation about integrated PHY

From: Rob Herring
Date: Fri Oct 27 2017 - 10:37:22 EST


On Tue, Oct 24, 2017 at 07:57:06PM +0200, Corentin Labbe wrote:
> This patch add documentation about the MDIO switch used on sun8i-h3-emac
> for integrated PHY.
>
> Signed-off-by: Corentin Labbe <clabbe.montjoie@xxxxxxxxx>
> ---
> .../devicetree/bindings/net/dwmac-sun8i.txt | 145 +++++++++++++++++++--
> 1 file changed, 133 insertions(+), 12 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
> index 725f3b187886..2600ce9ad3cc 100644
> --- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
> +++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
> @@ -4,18 +4,18 @@ This device is a platform glue layer for stmmac.
> Please see stmmac.txt for the other unchanged properties.
>
> Required properties:
> -- compatible: should be one of the following string:
> +- compatible: must be one of the following string:
> "allwinner,sun8i-a83t-emac"
> "allwinner,sun8i-h3-emac"
> "allwinner,sun8i-v3s-emac"
> "allwinner,sun50i-a64-emac"
> - reg: address and length of the register for the device.
> - interrupts: interrupt for the device
> -- interrupt-names: should be "macirq"
> +- interrupt-names: must be "macirq"
> - clocks: A phandle to the reference clock for this device
> -- clock-names: should be "stmmaceth"
> +- clock-names: must be "stmmaceth"
> - resets: A phandle to the reset control for this device
> -- reset-names: should be "stmmaceth"
> +- reset-names: must be "stmmaceth"
> - phy-mode: See ethernet.txt
> - phy-handle: See ethernet.txt
> - #address-cells: shall be 1
> @@ -39,23 +39,42 @@ Optional properties for the following compatibles:
> - allwinner,leds-active-low: EPHY LEDs are active low
>
> Required child node of emac:
> -- mdio bus node: should be named mdio
> +- mdio bus node: with compatible "snps,dwmac-mdio"

It should still be named mdio.

>
> Required properties of the mdio node:
> - #address-cells: shall be 1
> - #size-cells: shall be 0
>
> -The device node referenced by "phy" or "phy-handle" should be a child node
> +The device node referenced by "phy" or "phy-handle" must be a child node
> of the mdio node. See phy.txt for the generic PHY bindings.
>
> -Required properties of the phy node with the following compatibles:
> +The following compatibles require that the emac node have a mdio-mux child
> +node called "mdio-mux":
> + - "allwinner,sun8i-h3-emac"
> + - "allwinner,sun8i-v3s-emac":
> +Required properties for the mdio-mux node:
> + - compatible = "allwinner,sun8i-h3-mdio-mux"
> + - mdio-parent-bus: a phandle to EMAC mdio
> + - one child mdio for the integrated mdio with the compatible
> + "allwinner,sun8i-h3-mdio-internal"
> + - one child mdio for the external mdio if present (V3s have none)
> +Required properties for the mdio-mux children node:
> + - reg: 1 for internal MDIO bus, 2 for external MDIO bus
> +
> +The following compatibles require a PHY node representing the integrated
> +PHY, under the integrated MDIO bus node if an mdio-mux node is used:
> - "allwinner,sun8i-h3-emac",
> - "allwinner,sun8i-v3s-emac":
> +
> +Additional information regarding generic multiplexer properties can be found
> +at Documentation/devicetree/bindings/net/mdio-mux.txt
> +
> +Required properties of the integrated phy node:
> - clocks: a phandle to the reference clock for the EPHY
> - resets: a phandle to the reset control for the EPHY
> +- Must be a child of the integrated mdio
>
> -Example:
> -
> +Example with integrated PHY:
> emac: ethernet@1c0b000 {
> compatible = "allwinner,sun8i-h3-emac";
> syscon = <&syscon>;
> @@ -72,13 +91,115 @@ emac: ethernet@1c0b000 {
> phy-handle = <&int_mii_phy>;
> phy-mode = "mii";
> allwinner,leds-active-low;
> +
> + mdio0: mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "snps,dwmac-mdio";
> + };
> +
> + mdio-mux {
> + compatible = "mdio-mux", "allwinner,sun8i-h3-mdio-mux";

Drop mdio-mux.

With those fixed,

Acked-by: Rob Herring <robh@xxxxxxxxxx>