Re: [PATCH v2 0/2] mtd: nand: wait for tWHR, and fix the setup_data_interface of Denali

From: Masahiro Yamada
Date: Wed Oct 25 2017 - 13:05:19 EST


Hi Marc,

2017-10-19 23:58 GMT+09:00 Marc Gonzalez <marc_gonzalez@xxxxxxxxxxxxxxxx>:
> On 13/10/2017 10:34, Masahiro Yamada wrote:
>
>> 2017-10-04 20:05, Marc Gonzalez wrote:
>>
>>> On 29/09/2017 16:33, Masahiro Yamada wrote:
>>>
>>>> tango_nand.c is the only driver that sets NAND_WAIT_TCCS.
>>>>
>>>> Now, there is completely no delay when reading out the ID.
>>>>
>>>>
>>>> One safe change might be apply this patch,
>>>> then set NAND_WAIT_TWHR to tango_nand.c
>>>>
>>>>
>>>> I am guessing NAND_WAIT_TCCS was added for it.
>>>> Theoretically, I do not see logical difference between tCCS and tWHR.
>>>>
>>>> I am CCing Marc Gonzalez, the author of tango_nand.c
>>>
>>> Hello Masahiro,
>>>
>>> I remember having issues reading the ONFI ID when I was writing
>>> the driver, a year ago. Sometimes, the first few bytes appeared
>>> to be missing. This looked like a timing issue.
>>>
>>> Adding the dev_ready call-back solved the problem. Do you think
>>> that was by accident?
>>
>> It is odd to use dev_ready() hook to insert delay for the READ ID command.
>> READ ID command never toggles the device's Ready/Busy# pin.
>>
>>
>>> When I have more time, I will test the 4.14
>>> branch, to see if there are any issues with the current driver.
>>
>>
>> Yeah, I highly recommend you to test your driver on the latest kernel.
>> I suspect it is broken because READ ID command in the generic hook
>> has absolutely zero delay.
>>
>> As I proposed already, the correct fix it to wait for tWHR.
>
> Hello Masahiro,
>
> I checked out v4.14-rc5, imported the DMA driver (which is, unfortunately,
> not upstream) and DT nodes.


Thanks for your test report.

I was worried since you said
you had issues reading the ONFI ID.

Anyway, it is OK if your driver is working.

Thanks.




--
Best Regards
Masahiro Yamada