Re: [RFC PATCH v2 1/3] regulator: bindings: Add properties for coupled regulators

From: Rob Herring
Date: Wed Oct 25 2017 - 08:59:48 EST


On Wed, Oct 25, 2017 at 2:31 AM, Maciej Purski <m.purski@xxxxxxxxxxx> wrote:
>
>
> On 10/24/2017 08:58 PM, Rob Herring wrote:
>>
>> On Wed, Oct 18, 2017 at 02:47:00PM +0200, Maciej Purski wrote:
>>>
>>> Some regulators require keeping their voltage spread below defined
>>> max_spread.
>>>
>>> Add properties to provide information on regulators' coupling.
>>>
>>> Signed-off-by: Maciej Purski <m.purski@xxxxxxxxxxx>
>>> ---
>>> Documentation/devicetree/bindings/regulator/regulator.txt | 4 ++++
>>> 1 file changed, 4 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt
>>> b/Documentation/devicetree/bindings/regulator/regulator.txt
>>> index 378f6dc..6769565 100644
>>> --- a/Documentation/devicetree/bindings/regulator/regulator.txt
>>> +++ b/Documentation/devicetree/bindings/regulator/regulator.txt
>>> @@ -60,6 +60,10 @@ Optional properties:
>>> 0: Disable active discharge.
>>> 1: Enable active discharge.
>>> Absence of this property will leave configuration to default.
>>> +- regulator-coupled-with: Phandle to regulators with which the regulator
>>> + should be coupled. Allow up to 9 phandles.
>>
>>
>> 9? Sounds like a driver detail and pretty arbitrary.
>>
> It's just a constant number that I defined as MAX_COUPLED, because in fact
> there isn't any use-case yet for even more than two regulators so
> MAX_COUPLED equal to 9 is a really high number. If you find it cleaner, I
> can make this value variable.

Just drop the statement. The OS simply needs to support however many
there are for the h/w it supports.

>
>> Is this linkage 2-way meaning 2 coupled regulators both have links to
>> the other one? If so, then what happens when you have a high number? If
>> not, how does one decide which regulator has this property?
>
>
> Yes, it is 2-way. When you have a high number, then each regulator should
> have phandles to every other. So, if you have 3 regulators coupled, then
> each one should have 2 phandles.

Please add this to the description. That doesn't really seem ideal if
you have a lot, but I somewhat doubt we'll see more than 2-3.

Rob