[PATCH AUTOSEL for 4.4 21/25] Input: mpr121 - handle multiple bits change of status register

From: Levin, Alexander (Sasha Levin)
Date: Tue Oct 24 2017 - 22:05:14 EST


From: Akinobu Mita <akinobu.mita@xxxxxxxxx>

[ Upstream commit 08fea55e37f58371bffc5336a59e55d1f155955a ]

This driver reports input events on their interrupts which are triggered
by the sensor's status register changes. But only single bit change is
reported in the interrupt handler. So if there are multiple bits are
changed at almost the same time, other press or release events are ignored.

This fixes it by detecting all changed bits in the status register.

Signed-off-by: Akinobu Mita <akinobu.mita@xxxxxxxxx>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx>
---
drivers/input/keyboard/mpr121_touchkey.c | 23 ++++++++++++++---------
1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/input/keyboard/mpr121_touchkey.c b/drivers/input/keyboard/mpr121_touchkey.c
index 0fd612dd76ed..088a9f7c954e 100644
--- a/drivers/input/keyboard/mpr121_touchkey.c
+++ b/drivers/input/keyboard/mpr121_touchkey.c
@@ -87,7 +87,8 @@ static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id)
struct mpr121_touchkey *mpr121 = dev_id;
struct i2c_client *client = mpr121->client;
struct input_dev *input = mpr121->input_dev;
- unsigned int key_num, key_val, pressed;
+ unsigned long bit_changed;
+ unsigned int key_num;
int reg;

reg = i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_1_ADDR);
@@ -105,18 +106,22 @@ static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id)

reg &= TOUCH_STATUS_MASK;
/* use old press bit to figure out which bit changed */
- key_num = ffs(reg ^ mpr121->statusbits) - 1;
- pressed = reg & (1 << key_num);
+ bit_changed = reg ^ mpr121->statusbits;
mpr121->statusbits = reg;
+ for_each_set_bit(key_num, &bit_changed, mpr121->keycount) {
+ unsigned int key_val, pressed;

- key_val = mpr121->keycodes[key_num];
+ pressed = reg & BIT(key_num);
+ key_val = mpr121->keycodes[key_num];

- input_event(input, EV_MSC, MSC_SCAN, key_num);
- input_report_key(input, key_val, pressed);
- input_sync(input);
+ input_event(input, EV_MSC, MSC_SCAN, key_num);
+ input_report_key(input, key_val, pressed);
+
+ dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val,
+ pressed ? "pressed" : "released");

- dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val,
- pressed ? "pressed" : "released");
+ }
+ input_sync(input);

out:
return IRQ_HANDLED;
--
2.11.0