[RFC 3/3] arm64: dts: Modify device tree for support Hikey960

From: Yu Chen
Date: Tue Oct 24 2017 - 02:08:54 EST


Add dts for usb module of Hikey960.

Signed-off-by: Yu Chen <chenyu56@xxxxxxxxxx>
Signed-off-by: Ning Fan <fanning4@xxxxxxxxxxxxx>
Signed-off-by: Di Yang <yangdi10@xxxxxxxxxxxxx>
Signed-off-by: Rui Li <lirui39@xxxxxxxxxxxxx>

---
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 39 +++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index b7a90d632959..dff3e68c5e38 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -324,6 +324,18 @@
status = "disabled";
};

+ hubv2: gpio_hubv2 {
+ compatible = "hisilicon,gpio_hubv2";
+ typc_vbus_int_gpio,typec-gpios = <&gpio25 2 0>;
+ typc_vbus_enable_val = <1>;
+ otg_gpio = <&gpio25 6 0>;
+ hub_vdd12_en_gpio = <&gpio2 1 0>;
+ hub_vdd33_en_gpio = <&gpio5 6 0>;
+ hub_reset_en_gpio = <&gpio4 4 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbhub5734_pmx_func>;
+ };
+
i2c3: i2c@fdf0c000 {
compatible = "snps,designware-i2c";
reg = <0x0 0xfdf0c000 0x0 0x1000>;
@@ -978,5 +990,32 @@
clocks = <&crg_ctrl HI3660_OSC32K>;
clock-names = "apb_pclk";
};
+
+ hisi_usb@ff200000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "hisilicon,hi3660-dwc3";
+ reg = <0x0 0xff200000 0x0 0x1000
+ 0x0 0xff100000 0x0 0x100000>;
+ ranges;
+ bc_again_flag = <0>;
+
+ clocks = <&crg_ctrl HI3660_CLK_ABB_USB>,
+ <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+ clock-names = "clk_usb3phy_ref", "aclk_usb3otg";
+ eye_diagram_param = <0x1c466e3>;
+ eye_diagram_host_param = <0x1c466e3>;
+ usb3_phy_cr_param = <0xb80>;
+ usb3_phy_host_cr_param = <0x980>;
+ usb3_phy_tx_vboost_lvl = <0x5>;
+
+ dwc3@ff100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xff100000 0x0 0x100000>;
+ interrupts = <0 159 4>, <0 161 4>;
+ dr_mode = "otg";
+ maximum-speed = "super-speed";
+ };
+ };
};
};
--
2.11.GIT