[PATCH v2 07/14] ARM: dts: at91: sama5d27_som1_ek: remove not connected CAN0

From: Claudiu Beznea
Date: Tue Oct 10 2017 - 06:12:36 EST


From: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>

CAN0 is not connected on the sama5d27_som1_ek board, so remove
it from DT.

Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
[claudiu.beznea@xxxxxxxxxxxxx: change subject to match the desired prefix]
Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 12 ------------
1 file changed, 12 deletions(-)

diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 339f4e71cf40..651ed5d4defc 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -175,12 +175,6 @@
status = "okay";
};

- can0: can@f8054000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can0_default>;
- status = "disabled"; /* Conflict with isc. */
- };
-
uart3: serial@fc008000 {
atmel,use-dma-rx;
atmel,use-dma-tx;
@@ -279,12 +273,6 @@

pinctrl@fc038000 {

- pinctrl_can0_default: can0_default {
- pinmux = <PIN_PC10__CANTX0>,
- <PIN_PC11__CANRX0>;
- bias-disable;
- };
-
pinctrl_can1_default: can1_default {
pinmux = <PIN_PC26__CANTX1>,
<PIN_PC27__CANRX1>;
--
2.7.4