[PATCH v3 4/7] nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function

From: Bryan O'Donoghue
Date: Mon Oct 09 2017 - 10:12:50 EST


The i.MX7S/D has a different set of timing requirements, as a pre-cursor to
adding the i.MX7 timing parameters, move the i.MX6 stuff to a dedicated
function.

Fixes: 0642bac7da42 ("nvmem: imx-ocotp: add write support")

Signed-off-by: Bryan O'Donoghue <pure.logic@xxxxxxxxxxxxxxxxx>
Reviewed-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
---
drivers/nvmem/imx-ocotp.c | 47 +++++++++++++++++++++++++++--------------------
1 file changed, 27 insertions(+), 20 deletions(-)

diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
index 927d525..2645ee3 100644
--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -168,6 +168,31 @@ static int imx_ocotp_read(void *context, unsigned int offset,
return ret;
}

+static void imx_ocotp_set_imx6_timing(struct ocotp_priv *priv)
+{
+ unsigned long clk_rate = 0;
+ unsigned long strobe_read, relax, strobe_prog;
+ u32 timing = 0;
+
+ /* 47.3.1.3.1
+ * Program HW_OCOTP_TIMING[STROBE_PROG] and HW_OCOTP_TIMING[RELAX]
+ * fields with timing values to match the current frequency of the
+ * ipg_clk. OTP writes will work at maximum bus frequencies as long
+ * as the HW_OCOTP_TIMING parameters are set correctly.
+ */
+ clk_rate = clk_get_rate(priv->clk);
+
+ relax = clk_rate / (1000000000 / DEF_RELAX) - 1;
+ strobe_prog = clk_rate / (1000000000 / 10000) + 2 * (DEF_RELAX + 1) - 1;
+ strobe_read = clk_rate / (1000000000 / 40) + 2 * (DEF_RELAX + 1) - 1;
+
+ timing = strobe_prog & 0x00000FFF;
+ timing |= (relax << 12) & 0x0000F000;
+ timing |= (strobe_read << 16) & 0x003F0000;
+
+ writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
+}
+
static int imx_ocotp_write(void *context, unsigned int offset, void *val,
size_t bytes)
{
@@ -175,9 +200,6 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val,
u32 *buf = val;
int ret;

- unsigned long clk_rate = 0;
- unsigned long strobe_read, relax, strobe_prog;
- u32 timing = 0;
u32 ctrl;
u8 waddr;
u8 word = 0;
@@ -196,23 +218,8 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val,
return ret;
}

- /* 47.3.1.3.1
- * Program HW_OCOTP_TIMING[STROBE_PROG] and HW_OCOTP_TIMING[RELAX]
- * fields with timing values to match the current frequency of the
- * ipg_clk. OTP writes will work at maximum bus frequencies as long
- * as the HW_OCOTP_TIMING parameters are set correctly.
- */
- clk_rate = clk_get_rate(priv->clk);
-
- relax = clk_rate / (1000000000 / DEF_RELAX) - 1;
- strobe_prog = clk_rate / (1000000000 / 10000) + 2 * (DEF_RELAX + 1) - 1;
- strobe_read = clk_rate / (1000000000 / 40) + 2 * (DEF_RELAX + 1) - 1;
-
- timing = strobe_prog & 0x00000FFF;
- timing |= (relax << 12) & 0x0000F000;
- timing |= (strobe_read << 16) & 0x003F0000;
-
- writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
+ /* Setup the write timing values */
+ imx_ocotp_set_imx6_timing(priv);

/* 47.3.1.3.2
* Check that HW_OCOTP_CTRL[BUSY] and HW_OCOTP_CTRL[ERROR] are clear.
--
2.7.4