Re: [PATCH 2/2] pci: Expose offset, stride, and VF device ID via sysfs

From: Sironi, Filippo
Date: Fri Sep 29 2017 - 03:53:47 EST



Hi Bjorn,

> On 25. Sep 2017, at 20:55, Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
>
> Hi Filippo,
>
> On Mon, Aug 28, 2017 at 03:38:50PM +0200, Filippo Sironi wrote:
>> +static ssize_t sriov_vf_did_show(struct device *dev,
>> + struct device_attribute *attr,
>> + char *buf)
>> +{
>> + struct pci_dev *pdev = to_pci_dev(dev);
>> +
>> + return sprintf(buf, "%x\n", pdev->sriov->vf_did);
>> +}
>
> What does the vf_did part look like in sysfs? Do we have a directory with
> both "device" and "vf_did" in it? If so, why do we have both and do we
> need both? Could we put the vf_did in the "device" file?

On my machine:

/sys/bus/pci/devices/0000:03:00.0# ls -l # this is the PF
total 0
-rw-r--r-- 1 root root 4096 Sep 28 19:41 broken_parity_status
-r--r--r-- 1 root root 4096 Sep 28 19:41 class
-rw-r--r-- 1 root root 4096 Sep 28 19:41 config
-r--r--r-- 1 root root 4096 Sep 28 19:41 consistent_dma_mask_bits
-rw-r--r-- 1 root root 4096 Sep 28 19:41 d3cold_allowed
-r--r--r-- 1 root root 4096 Sep 28 19:41 device
-r--r--r-- 1 root root 4096 Sep 28 19:41 dma_mask_bits
lrwxrwxrwx 1 root root 0 Sep 28 19:41 driver -> ../../../../bus/pci/drivers/igb
-rw-r--r-- 1 root root 4096 Sep 28 19:41 driver_override
-rw-r--r-- 1 root root 4096 Sep 28 19:41 enable
lrwxrwxrwx 1 root root 0 Sep 28 19:41 firmware_node -> ../../../LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4b/device:4c
-r--r--r-- 1 root root 4096 Sep 28 19:41 irq
-r--r--r-- 1 root root 4096 Sep 28 19:41 local_cpulist
-r--r--r-- 1 root root 4096 Sep 28 19:41 local_cpus
-r--r--r-- 1 root root 4096 Sep 28 19:41 modalias
-rw-r--r-- 1 root root 4096 Sep 28 19:41 msi_bus
drwxr-xr-x 2 root root 0 Sep 29 09:44 msi_irqs
drwxr-xr-x 3 root root 0 Sep 28 19:41 net
-rw-r--r-- 1 root root 4096 Sep 28 19:41 numa_node
-r--r--r-- 1 root root 4096 Sep 28 19:41 offset # this is new
drwxr-xr-x 2 root root 0 Sep 28 19:41 power
drwxr-xr-x 3 root root 0 Sep 28 19:41 ptp
--w--w---- 1 root root 4096 Sep 28 19:41 remove
--w--w---- 1 root root 4096 Sep 28 19:41 rescan
--w------- 1 root root 4096 Sep 28 19:41 reset
-r--r--r-- 1 root root 4096 Sep 28 19:41 resource
-rw------- 1 root root 131072 Sep 28 19:41 resource0
-rw------- 1 root root 4194304 Sep 28 19:41 resource1
-rw------- 1 root root 32 Sep 28 19:41 resource2
-rw------- 1 root root 16384 Sep 28 19:41 resource3
-r--r--r-- 1 root root 4096 Sep 28 19:41 revision
-rw-rw-r-- 1 root root 4096 Sep 29 09:44 sriov_numvfs
-r--r--r-- 1 root root 4096 Sep 28 19:41 sriov_totalvfs
-r--r--r-- 1 root root 4096 Sep 28 19:41 stride # this is new
lrwxrwxrwx 1 root root 0 Sep 28 19:41 subsystem -> ../../../../bus/pci
-r--r--r-- 1 root root 4096 Sep 28 19:41 subsystem_device
-r--r--r-- 1 root root 4096 Sep 28 19:41 subsystem_vendor
-rw-r--r-- 1 root root 4096 Sep 28 19:41 uevent
-r--r--r-- 1 root root 4096 Sep 28 19:41 vendor
-r--r--r-- 1 root root 4096 Sep 28 19:41 vf_did # this is new
lrwxrwxrwx 1 root root 0 Sep 29 09:44 virtfn0 -> ../0000:03:10.0

nothing changes on for VFs.
Then:

/sys/bus/pci/devices/0000:03:00.0# cat device
0x10c9

/sys/bus/pci/devices/0000:03:00.0# cat vf_did
0x10ca

Putting the VF device ID in the PF device file would be a change of
that we expose to userspace. Something might break.

vf_did provides a easy way to retrieve the VF device ID without reading
the PF config (looking up the SR-IOV capability and reading it) or without
enabling SR-IOV to read for example virtfn0/device.

Similar considerations (ease of access) apply to offset and stride.


>> static ssize_t sriov_drivers_autoprobe_show(struct device *dev,
>> struct device_attribute *attr,
>> char *buf)
>> @@ -676,6 +703,9 @@ static struct device_attribute sriov_totalvfs_attr = __ATTR_RO(sriov_totalvfs);
>> static struct device_attribute sriov_numvfs_attr =
>> __ATTR(sriov_numvfs, (S_IRUGO|S_IWUSR|S_IWGRP),
>> sriov_numvfs_show, sriov_numvfs_store);
>> +static struct device_attribute sriov_offset_attr = __ATTR_RO(sriov_offset);
>> +static struct device_attribute sriov_stride_attr = __ATTR_RO(sriov_stride);
>> +static struct device_attribute sriov_vf_did_attr = __ATTR_RO(sriov_vf_did);
>> static struct device_attribute sriov_drivers_autoprobe_attr =
>> __ATTR(sriov_drivers_autoprobe, (S_IRUGO|S_IWUSR|S_IWGRP),
>> sriov_drivers_autoprobe_show, sriov_drivers_autoprobe_store);
>> @@ -1744,6 +1774,9 @@ static struct attribute_group pci_dev_hp_attr_group = {
>> static struct attribute *sriov_dev_attrs[] = {
>> &sriov_totalvfs_attr.attr,
>> &sriov_numvfs_attr.attr,
>> + &sriov_offset_attr.attr,
>> + &sriov_stride_attr.attr,
>> + &sriov_vf_did_attr.attr,
>> &sriov_drivers_autoprobe_attr.attr,
>> NULL,
>> };
>> --
>> 2.7.4
>>
>

Amazon Development Center Germany GmbH
Berlin - Dresden - Aachen
main office: Krausenstr. 38, 10117 Berlin
Geschaeftsfuehrer: Dr. Ralf Herbrich, Christian Schlaeger
Ust-ID: DE289237879
Eingetragen am Amtsgericht Charlottenburg HRB 149173 B