Re: [PATCH v6 05/11] dt-bindings: net: dwmac-sun8i: update documentation about integrated PHY

From: Corentin Labbe
Date: Thu Sep 28 2017 - 03:37:23 EST


On Wed, Sep 27, 2017 at 04:02:10PM +0200, Andrew Lunn wrote:
> Hi Corentin
>
> > +Required properties for the mdio-mux node:
> > + - compatible = "mdio-mux"
>
> This is too generic. Please add a more specific compatible for this
> particular mux. You can keep "mdio-mux", since that is what the MDIO
> subsystem will look for.
>

I will add allwinner,sun8i-h3-mdio-mux

> > +Required properties of the integrated phy node:
> > - clocks: a phandle to the reference clock for the EPHY
> > - resets: a phandle to the reset control for the EPHY
> > +- phy-is-integrated
>
> So the last thing you said is that the mux is not the problem
> here. Something else is locking up. Did you discover what?
>
> I really would like phy-is-integrated to go away.
>

I have found the problem: by enabling ephy clk/reset the timeout does not occur anymore.
So we could remove phy-is-integrated by:
Moving internal phy clk/reset handling in mdio_mux_syscon_switch_fn()
But this means:
- getting internalphy node always by manually get internal_mdio/internal_phy (and not by the given phyhandle)
- doing some unnecessary tasks (enable/scan/disable) when external_phy is needed

Regards