Re: [PATCH v3 4/8] mtd: nand: atmel: Avoid ECC errors when leaving backup mode

From: Romain Izard
Date: Wed Sep 27 2017 - 11:32:40 EST


2017-09-27 17:08 GMT+02:00 Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>:
> On Wed, 27 Sep 2017 10:35:51 +0200
> Romain Izard <romain.izard.pro@xxxxxxxxx> wrote:
>
>> During backup mode, the contents of all registers will be cleared as the
>> SoC will be completely powered down. For a product that boots on NAND
>> Flash memory, the bootloader will obviously use the related controller
>> to read the Flash and correct any detected error in the memory, before
>> handling back control to the kernel's resuming entry point.
>>
>> But it does not clean the NAND controller registers after use and on its
>> side the kernel driver expects the error locator to be powered down and
>> in a clean state. Add a resume hook for the PMECC error locator, and
>> reset its registers.
>>
>> Signed-off-by: Romain Izard <romain.izard.pro@xxxxxxxxx>
>> ---
>> Change in v3:
>> * keep the PMECC disabled when not in use, and use atmel_pmecc_resume to
>> reset the controller after the bootloader has left it enabled.
>>
>> drivers/mtd/nand/atmel/nand-controller.c | 3 +++
>> drivers/mtd/nand/atmel/pmecc.c | 22 ++++++++++++++--------
>> drivers/mtd/nand/atmel/pmecc.h | 1 +
>> 3 files changed, 18 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/mtd/nand/atmel/nand-controller.c b/drivers/mtd/nand/atmel/nand-controller.c
>> index f25eca79f4e5..86c2199380c2 100644
>> --- a/drivers/mtd/nand/atmel/nand-controller.c
>> +++ b/drivers/mtd/nand/atmel/nand-controller.c
>> @@ -2530,6 +2530,9 @@ static __maybe_unused int atmel_nand_controller_resume(struct device *dev)
>> struct atmel_nand_controller *nc = dev_get_drvdata(dev);
>> struct atmel_nand *nand;
>>
>> + if (nand->pmecc)
>> + atmel_pmecc_resume(nand->pmecc);
>> +
>
> nand is used uninitialized here, and atmel_pmecc_resume() should be
> passed a atmel_pmecc object not a atmel_pmecc_user.
>
> if (nc->pmecc)
> atmel_pmecc_resume(nc->pmecc);
>
And yet I thought I correctly tested this code...

:(

>> list_for_each_entry(nand, &nc->chips, node) {
>> int i;
>>
>> diff --git a/drivers/mtd/nand/atmel/pmecc.c b/drivers/mtd/nand/atmel/pmecc.c
>> index 146af8218314..ff09c0f25dd4 100644
>> --- a/drivers/mtd/nand/atmel/pmecc.c
>> +++ b/drivers/mtd/nand/atmel/pmecc.c
>> @@ -765,6 +765,12 @@ void atmel_pmecc_get_generated_eccbytes(struct atmel_pmecc_user *user,
>> }
>> EXPORT_SYMBOL_GPL(atmel_pmecc_get_generated_eccbytes);
>>
>> +void atmel_pmecc_reset(struct atmel_pmecc *pmecc)
>> +{
>> + writel(PMECC_CTRL_RST, pmecc->regs.base + ATMEL_PMECC_CTRL);
>> + writel(PMECC_CTRL_DISABLE, pmecc->regs.base + ATMEL_PMECC_CTRL);
>> +}
>
> It's not used outside of this file, so it should have a static
> specifier. Anyway, I wonder why you don't expose atmel_pmecc_reset()
> directly instead of creating this atmel_pmecc_resume() wrapper.

I will fix this...

--
Romain Izard