RE: [PATCH] RM64: dts: ls208xa: Add iommu-map property for pci

From: Bharat Bhushan
Date: Thu Aug 31 2017 - 07:22:39 EST




> -----Original Message-----
> From: Marc Zyngier [mailto:marc.zyngier@xxxxxxx]
> Sent: Thursday, August 31, 2017 4:20 PM
> To: Bharat Bhushan <bharat.bhushan@xxxxxxx>; robh+dt@xxxxxxxxxx;
> Mark Rutland <mark.rutland@xxxxxxx>; will.deacon@xxxxxxx;
> oss@xxxxxxxxxxxx; Gang Liu <gang.liu@xxxxxxx>;
> devicetree@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; catalin.marinas@xxxxxxx
> Subject: Re: [PATCH] RM64: dts: ls208xa: Add iommu-map property for pci
>
> [Fixing Mark's address...]
>
> On 31/08/17 11:41, Bharat Bhushan wrote:
> >
> >> -----Original Message-----
> >> From: Marc Zyngier [mailto:marc.zyngier@xxxxxxx]
> >> Sent: Thursday, August 31, 2017 3:02 PM
> >> To: Bharat Bhushan <bharat.bhushan@xxxxxxx>; robh+dt@xxxxxxxxxx;
> >> ark.rutland@xxxxxxx; will.deacon@xxxxxxx; oss@xxxxxxxxxxxx; Gang
> Liu
> >> <gang.liu@xxxxxxx>; devicetree@xxxxxxxxxxxxxxx; linux-arm-
> >> kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> >> catalin.marinas@xxxxxxx
> >> Subject: Re: [PATCH] RM64: dts: ls208xa: Add iommu-map property for
> >> pci
> >>
> >> On 31/08/17 10:23, Bharat Bhushan wrote:
> >>> This patch adds iommu-map property for PCIe, which enables SMMU for
> >>> these devices on LS208xA devices.
> >>>
> >>> Signed-off-by: Bharat Bhushan <Bharat.Bhushan@xxxxxxx>
> >>> ---
> >>> arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 4 ++++
> >>> 1 file changed, 4 insertions(+)
> >>>
> >>> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> >>> b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> >>> index 94cdd30..67cf605 100644
> >>> --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> >>> +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> >>> @@ -606,6 +606,7 @@
> >>> num-lanes = <4>;
> >>> bus-range = <0x0 0xff>;
> >>> msi-parent = <&its>;
> >>> + iommu-map = <0 &smmu 0 1>; /* This is fixed-up by
> >> u-boot */
> >>
> >> What does this do when your version of u-boot doesn't fill this in for you?
> >
> > Good question, frankly I have not thought of this case before.
> > But if we pass length = 0 in above property then no fixup happen with
> > happen with older u-boot. In this case of_iommu_configure() will
> > return NULL iommu-ops and it switch to swio-tlb. Will that work?
> I really don't like this. You rely on having invalid data in the DT, and that
> seems just wrong.
>
> Why can't u-boot just generate that property, and we leave the DT alone?

We do not have smmu phandle allowing uboot to generate this.

> Or even better, you provide the right information for the few boards that are
> based on this SoC, not relying on u-boot for anything that is in the kernel
> tree?

On our platforms we have a h/w table which converts RID->Device-Id. I will check what will happen if that table is not initialized, can RID be equal to device-id is that case.
If that will be allowed than we can give right information that will work with u-boot not updating this property.

Will revert after confirming this.

Thanks
-Bharat
>
> Thanks,
>
> M.
> --
> Jazz is not dead. It just smells funny...