[PATCH v1 3/5] mmc: sdhci-msm: Add support to wait for power irq

From: Vijay Viswanath
Date: Wed Aug 30 2017 - 08:53:23 EST


From: Sahitya Tummala <stummala@xxxxxxxxxxxxxx>

Add support API which will check if power irq is expected to be
generated and wait for the power irq to come and complete if the irq is
expected.

Signed-off-by: Sahitya Tummala <stummala@xxxxxxxxxxxxxx>
Signed-off-by: Vijay Viswanath <vviswana@xxxxxxxxxxxxxx>
---
drivers/mmc/host/sdhci-msm.c | 124 ++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 122 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 42a65ab..e3e385e 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -123,6 +123,10 @@
#define CMUX_SHIFT_PHASE_MASK (7 << CMUX_SHIFT_PHASE_SHIFT)

#define MSM_MMC_AUTOSUSPEND_DELAY_MS 50
+
+/* Timeout value to avoid infinite waiting for pwr_irq */
+#define MSM_PWR_IRQ_TIMEOUT_MS 5000
+
struct sdhci_msm_host {
struct platform_device *pdev;
void __iomem *core_mem; /* MSM SDCC mapped address */
@@ -138,6 +142,12 @@ struct sdhci_msm_host {
bool calibration_done;
u8 saved_tuning_phase;
bool use_cdclp533;
+ u32 curr_pwr_state;
+ u32 curr_io_level;
+#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
+ wait_queue_head_t pwr_irq_wait;
+ bool pwr_irq_flag;
+#endif
};

static unsigned int msm_get_clock_rate_for_bus_mode(struct sdhci_host *host,
@@ -995,6 +1005,87 @@ static void sdhci_msm_set_uhs_signaling(struct sdhci_host *host,
sdhci_msm_hs400(host, &mmc->ios);
}

+#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
+static inline void sdhci_msm_init_pwr_irq_wait(struct sdhci_msm_host *msm_host)
+{
+ init_waitqueue_head(&msm_host->pwr_irq_wait);
+}
+
+static inline void sdhci_msm_complete_pwr_irq_wait(
+ struct sdhci_msm_host *msm_host)
+{
+ wake_up(&msm_host->pwr_irq_wait);
+}
+
+/*
+ * sdhci_msm_check_power_status API should be called when registers writes
+ * which can toggle sdhci IO bus ON/OFF or change IO lines HIGH/LOW happens.
+ * To what state the register writes will change the IO lines should be passed
+ * as the argument req_type. This API will check whether the IO line's state
+ * is already the expected state and will wait for power irq only if
+ * power irq is expected to be trigerred based on the current IO line state
+ * and expected IO line state.
+ */
+static void sdhci_msm_check_power_status(struct sdhci_host *host, u32 req_type)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+ bool done = false;
+
+ pr_debug("%s: %s: request %d curr_pwr_state %x curr_io_level %x\n",
+ mmc_hostname(host->mmc), __func__, req_type,
+ msm_host->curr_pwr_state, msm_host->curr_io_level);
+
+ /*
+ * The IRQ for request type IO High/LOW will be generated when -
+ * there is a state change in 1.8V enable bit (bit 3) of
+ * SDHCI_HOST_CONTROL2 register. The reset state of that bit is 0
+ * which indicates 3.3V IO voltage. So, when MMC core layer tries
+ * to set it to 3.3V before card detection happens, the
+ * IRQ doesn't get triggered as there is no state change in this bit.
+ * The driver already handles this case by changing the IO voltage
+ * level to high as part of controller power up sequence. Hence, check
+ * for host->pwr to handle a case where IO voltage high request is
+ * issued even before controller power up.
+ */
+ if ((req_type & REQ_IO_HIGH) && !host->pwr) {
+ pr_debug("%s: do not wait for power IRQ that never comes, req_type: %d\n",
+ mmc_hostname(host->mmc), req_type);
+ return;
+ }
+ if ((req_type & msm_host->curr_pwr_state) ||
+ (req_type & msm_host->curr_io_level))
+ done = true;
+ /*
+ * This is needed here to hanlde a case where IRQ gets
+ * triggered even before this function is called so that
+ * x->done counter of completion gets reset. Otherwise,
+ * next call to wait_for_completion returns immediately
+ * without actually waiting for the IRQ to be handled.
+ */
+ if (!done) {
+ if (!wait_event_timeout(msm_host->pwr_irq_wait,
+ msm_host->pwr_irq_flag,
+ msecs_to_jiffies(MSM_PWR_IRQ_TIMEOUT_MS)))
+ __WARN_printf("%s: pwr_irq for req: (%d) timed out\n",
+ mmc_hostname(host->mmc), req_type);
+ }
+ msm_host->pwr_irq_flag = 0;
+ pr_debug("%s: %s: request %d done\n", mmc_hostname(host->mmc),
+ __func__, req_type);
+}
+#else
+static inline void sdhci_msm_init_pwr_irq_completion(
+ struct sdhci_msm_host *msm_host)
+{
+}
+
+static inline void sdhci_msm_complete_pwr_irq_completion(
+ struct sdhci_msm_host *msm_host)
+{
+}
+#endif
+
static void sdhci_msm_dump_pwr_ctrl_regs(struct sdhci_host *host)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -1013,6 +1104,8 @@ static void sdhci_msm_handle_pwr_irq(struct sdhci_host *host, int irq)
struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
u32 irq_status, irq_ack = 0;
int retry = 10;
+ int pwr_state = 0, io_level = 0;
+

irq_status = readl_relaxed(msm_host->core_mem + CORE_PWRCTL_STATUS);
irq_status &= INT_MASK;
@@ -1041,10 +1134,26 @@ static void sdhci_msm_handle_pwr_irq(struct sdhci_host *host, int irq)
udelay(10);
}

- if (irq_status & (CORE_PWRCTL_BUS_ON | CORE_PWRCTL_BUS_OFF))
+ /* Handle BUS ON/OFF*/
+ if (irq_status & CORE_PWRCTL_BUS_ON) {
+ pwr_state = REQ_BUS_ON;
+ io_level = REQ_IO_HIGH;
irq_ack |= CORE_PWRCTL_BUS_SUCCESS;
- if (irq_status & (CORE_PWRCTL_IO_LOW | CORE_PWRCTL_IO_HIGH))
+ }
+ if (irq_status & CORE_PWRCTL_BUS_OFF) {
+ pwr_state = REQ_BUS_OFF;
+ io_level = REQ_IO_LOW;
+ irq_ack |= CORE_PWRCTL_BUS_SUCCESS;
+ }
+ /* Handle IO LOW/HIGH */
+ if (irq_status & CORE_PWRCTL_IO_LOW) {
+ io_level = REQ_IO_LOW;
+ irq_ack |= CORE_PWRCTL_IO_SUCCESS;
+ }
+ if (irq_status & CORE_PWRCTL_IO_HIGH) {
+ io_level = REQ_IO_HIGH;
irq_ack |= CORE_PWRCTL_IO_SUCCESS;
+ }

/*
* The driver has to acknowledge the interrupt, switch voltages and
@@ -1053,6 +1162,11 @@ static void sdhci_msm_handle_pwr_irq(struct sdhci_host *host, int irq)
*/
writel_relaxed(irq_ack, msm_host->core_mem + CORE_PWRCTL_CTL);

+ if (pwr_state)
+ msm_host->curr_pwr_state = pwr_state;
+ if (io_level)
+ msm_host->curr_io_level = io_level;
+
pr_debug("%s: %s: Handled IRQ(%d), irq_status=0x%x, ack=0x%x\n",
mmc_hostname(msm_host->mmc), __func__, irq, irq_status,
irq_ack);
@@ -1061,8 +1175,13 @@ static void sdhci_msm_handle_pwr_irq(struct sdhci_host *host, int irq)
static irqreturn_t sdhci_msm_pwr_irq(int irq, void *data)
{
struct sdhci_host *host = (struct sdhci_host *)data;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);

sdhci_msm_handle_pwr_irq(host, irq);
+ msm_host->pwr_irq_flag = 1;
+ sdhci_msm_complete_pwr_irq_wait(msm_host);
+

return IRQ_HANDLED;
}
@@ -1312,6 +1431,7 @@ static int sdhci_msm_probe(struct platform_device *pdev)
goto clk_disable;
}

+ sdhci_msm_init_pwr_irq_wait(msm_host);
/* Enable pwr irq interrupts */
writel_relaxed(INT_MASK, msm_host->core_mem + CORE_PWRCTL_MASK);

--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.