[PATCH v3 3/3] arm64: dts: qcom: Specify dload address for msm8916 and msm8996

From: Bjorn Andersson
Date: Wed Aug 09 2017 - 16:10:50 EST


On msm8916 and msm8996 boards a secure io-write is used to write the
magic for selecting "download mode", specify this address in the
DeviceTree.

Note that qcom_scm.download_mode=1 must be specified on the kernel
command line for the kernel to attempt selecting download mode.

Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 ++
arch/arm64/boot/dts/qcom/msm8996.dtsi | 7 +++++++
2 files changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 039991f80831..b7197f2e7209 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -241,6 +241,8 @@
clocks = <&gcc GCC_CRYPTO_CLK>, <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>;
clock-names = "core", "bus", "iface";
#reset-cells = <1>;
+
+ qcom,dload-mode = <&tcsr>;
};
};

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 8f085716e258..2eee6a33f22b 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -261,6 +261,8 @@
firmware {
scm {
compatible = "qcom,scm-msm8996";
+
+ qcom,dload-mode = <&tcsr>;
};
};

@@ -287,6 +289,11 @@
reg = <0x740000 0x20000>;
};

+ tcsr: syscon@1937000 {
+ compatible = "qcom,tcsr-msm8996", "syscon";
+ reg = <0x7a0000 0x18000>;
+ };
+
intc: interrupt-controller@9bc0000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
--
2.12.0