Re: [PATCH v6 1/7] dt-bindings: phy: qmp: Add output-clock-names

From: Bjorn Helgaas
Date: Thu Aug 03 2017 - 19:04:50 EST


On Mon, Jul 31, 2017 at 12:04:11PM +0530, Varadarajan Narayanan wrote:
> The phy outputs a clock that will act as the parent for
> the phy's pipe clock. Add the name of this clock to the

s/phy/PHY/

> lane's DT node.
>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> Signed-off-by: Varadarajan Narayanan <varada@xxxxxxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> index e11c563..5d7a51f 100644
> --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> @@ -60,6 +60,8 @@ Required properties for child node:
> one for each entry in clock-names.
> - clock-names: Must contain following for pcie and usb qmp phys:
> "pipe<lane-number>" for pipe clock specific to each lane.
> + - clock-output-names: Name of the phy clock that will be the parent for
> + the above pipe clock.

s/phy/PHY/ (this file is a hodge-podge so I guess this isn't making it much
worse)

>
> - resets: a list of phandles and reset controller specifier pairs,
> one for each entry in reset-names.
> @@ -96,6 +98,7 @@ Example:
>
> clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
> clock-names = "pipe0";
> + clock-output-names = "pcie_0_pipe_clk_src";
> resets = <&gcc GCC_PCIE_0_PHY_BCR>;
> reset-names = "lane0";
> };
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
>