[PATCH v3 1/8] dt-bindings: phy: qmp: Add output-clock-names

From: Varadarajan Narayanan
Date: Thu Jul 20 2017 - 01:35:07 EST


The phy outputs a clock that will act as the parent for
the phy's pipe clock. Add the name of this clock to the
lane's DT node.

Acked-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Varadarajan Narayanan <varada@xxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 3 +++
1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index e11c563..5d7a51f 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -60,6 +60,8 @@ Required properties for child node:
one for each entry in clock-names.
- clock-names: Must contain following for pcie and usb qmp phys:
"pipe<lane-number>" for pipe clock specific to each lane.
+ - clock-output-names: Name of the phy clock that will be the parent for
+ the above pipe clock.

- resets: a list of phandles and reset controller specifier pairs,
one for each entry in reset-names.
@@ -96,6 +98,7 @@ Example:

clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
clock-names = "pipe0";
+ clock-output-names = "pcie_0_pipe_clk_src";
resets = <&gcc GCC_PCIE_0_PHY_BCR>;
reset-names = "lane0";
};
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation