[PATCHv5 2/3] dt-bindings: i2c: Add Altera I2C Controller

From: thor . thayer
Date: Mon Jul 17 2017 - 12:32:24 EST


From: Thor Thayer <thor.thayer@xxxxxxxxxxxxxxx>

Add the documentation to support the Altera synthesizable
logic I2C Controller in FPGA.

Signed-off-by: Thor Thayer <thor.thayer@xxxxxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
v2 Change the subject to identify dt-bindings
Add synthesizable logic to description.
Change compatible string to "altr,softip-i2c"
Make description of clock phandle singular since 1 clock.
Remove altr, from fifo-size
Specify fifo-size is in bytes.
v3 Add version to compatible string "altr,softip-i2c-v1.0"
Add for use in FPGA in description.
v4 No Change - Add Acked-by
v5 No Change
---
.../devicetree/bindings/i2c/i2c-altera.txt | 39 ++++++++++++++++++++++
1 file changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-altera.txt

diff --git a/Documentation/devicetree/bindings/i2c/i2c-altera.txt b/Documentation/devicetree/bindings/i2c/i2c-altera.txt
new file mode 100644
index 0000000..767664f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-altera.txt
@@ -0,0 +1,39 @@
+* Altera I2C Controller
+* This is Altera's synthesizable logic block I2C Controller for use
+* in Altera's FPGAs.
+
+Required properties :
+ - compatible : should be "altr,softip-i2c-v1.0"
+ - reg : Offset and length of the register set for the device
+ - interrupts : <IRQ> where IRQ is the interrupt number.
+ - clocks : phandle to input clock.
+ - #address-cells = <1>;
+ - #size-cells = <0>;
+
+Recommended properties :
+ - clock-frequency : desired I2C bus clock frequency in Hz.
+
+Optional properties :
+ - fifo-size : Size of the RX and TX FIFOs in bytes.
+ - Child nodes conforming to i2c bus binding
+
+Example :
+
+ i2c@100080000 {
+ compatible = "altr,softip-i2c-v1.0";
+ reg = <0x00000001 0x00080000 0x00000040>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 43 4>;
+ clocks = <&clk_0>;
+ clock-frequency = <100000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ fifo-size = <4>;
+
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+ };
+
--
2.7.4