Re: [RFC V2 1/6] cpufreq: Replace "max_transition_latency" with "dynamic_switching"

From: Viresh Kumar
Date: Mon Jul 17 2017 - 07:59:00 EST


On 15-07-17, 14:26, Rafael J. Wysocki wrote:
> On Saturday, July 15, 2017 07:08:28 AM Dominik Brodowski wrote:

> > Exactly. But lets take a quick look at the drivers ussing CPUFREQ_ETERNAL:
> >
> > Using CPUFREQ_ETERNAL, as policy-setting drivers:
> >
> > - intel_pstate.c - for the intel_pstate driver, which defers to the hardware
> > to do frequency selection.
> >
> > - longrun.c - hardware-based frequency selection.
>
> That may or may not be hardware-based, but if the ->setpolicy callback is
> present, transition_latency doesn't matter anyway.

Right and to avoid confusion its probably better to avoid setting
transition_latency completely from them. I will try to include that in
my series.

> > => Those drivers are not interested in kernel-based dynamic frequency
> > selection anyway.
>
> Right.
>
> >
> > Using CPUFREQ_ETERNAL as a fallback if transition_latency is unknown:
> > - arm_big_little.c
> > - arm_big_little_dt.c
> > - cpufreq-dt.c
> > - imx6q-cpufreq.c
> > - spear_cpufreq.c
> >
> > => As it seems to be an error case, it seems best to bail out on the
> > safe side and disallow dynamic frequency scaling. Platform experts might
> > know better, though.
> >
>
> Well, Viresh should know what to do for some of them at least. :-)

Yeah, they just don't know how much time it takes to change the
frequency. We shouldn't disallow DVFS for them.

> > Using CPUFREQ_ETERNAL unconditionally:
> > - cpufreq-nforce2.c - over a decade old driver; has a commented-out hack
> > to mdelay(10ms) after each frequency transition. This smells like it might
> > be unsafe to do dynamic switching more often than that.
> >
> > - elanfreq.c - Has udelay(1ms+10ms) in transition path, so the same terms
> > and conditions seem to apply.
> >
> > - gx-suspmod.c - works by a mechanism which reminds me of CPU frequency
> > throttling, but chipset- and not CPU-based.
> >
> > - pmac32-cpufreq.c - for some models, it sets latency to ETERNAL. In some
> > frequency switchign code, it has mdelay(10ms) calls.
> >
> > - speedsstep-smi.c - this case was discussed previously.
> >
> > => For those drivers, dynamic frequency scaling should not be enabled IMO.
>
> Agreed.

+1 and these are the drivers which should have this new variable set
to avoid DVFS.

Anyone who is setting CPUFREQ_ETERNAL unconditionally should be
setting the new flag.

> > To summarize: At first, I'd propose a *complete* switch-over from
> > CPUFREQ_ETERNAL to setting the flag "no DVFS" you have proposed.
>
> So we seem to be in agreement over this.

The usage of CPUFREQ_ETERNAL had been confusing over the years, i.e.
some use it to not allow ondemand/conservative, while others use it as
they don't know their transition latencies.

A complete switch over may not be good for the later.

I would suggest we only move the platforms which set latency to
CPUFREQ_ETERNAL unconditionally to the "no DVFS" list. And everyone
else can still continue with CPUFREQ_ETERNAL. I have earlier proposed
finding their latencies dynamically and will try to include that for
them.

--
viresh