Re: [PATCH 04/11] mmc: sunxi: Keep default timing phase settings for new timing mode

From: Ulf Hansson
Date: Mon Jul 17 2017 - 06:37:50 EST


+stable

On 14 July 2017 at 08:42, Chen-Yu Tsai <wens@xxxxxxxx> wrote:
> The register for the "new timing mode" also has bit fields for setting
> output and sample timing phases. According to comments in Allwinner's
> BSP kernel, the default values are good enough.
>
> Keep the default values already in the hardware when setting new timing
> mode, instead of overwriting the whole register.
>
> Fixes: 9a37e53e451e ("mmc: sunxi: Enable the new timings for the A64 MMC
> controllers")
> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>

Thanks, applied for fixes and added a stable tag.

Kind regards
Uffe

> ---
> drivers/mmc/host/sunxi-mmc.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
> index d6fa2214aaae..0fb4e4c119e1 100644
> --- a/drivers/mmc/host/sunxi-mmc.c
> +++ b/drivers/mmc/host/sunxi-mmc.c
> @@ -793,8 +793,12 @@ static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host,
> }
> mmc_writel(host, REG_CLKCR, rval);
>
> - if (host->cfg->needs_new_timings)
> - mmc_writel(host, REG_SD_NTSR, SDXC_2X_TIMING_MODE);
> + if (host->cfg->needs_new_timings) {
> + /* Don't touch the delay bits */
> + rval = mmc_readl(host, REG_SD_NTSR);
> + rval |= SDXC_2X_TIMING_MODE;
> + mmc_writel(host, REG_SD_NTSR, rval);
> + }
>
> ret = sunxi_mmc_clk_set_phase(host, ios, rate);
> if (ret)
> --
> 2.13.2
>