[PATCH 04/13] mpt3sas: Handle NVMe PCIe device related events generated from firmware.

From: Suganath Prabu S
Date: Thu Jun 29 2017 - 10:21:34 EST


* The controller firmware sends separate events for NVMe devices and
PCIe switches similar to existing SAS events.

* NVMe device detection, addition and removal are reported by the
firmware through PCIe Topology Change list events.

* The PCIe device state change events are sent when the firmware
detects any abnormal conditions with a NVMe device or switch.

* The enumeration event are sent when the firmware starts PCIe device
enumeration and stops.

* This patch has the code change to handle the events and add/remove
NVMe devices in driver's inventory.

Signed-off-by: Chaitra P B <chaitra.basappa@xxxxxxxxxxxx>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@xxxxxxxxxxxx>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 30 ++-
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 468 +++++++++++++++++++++++++++++++++-
2 files changed, 492 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index a64cfce..09fecd0 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -663,6 +663,26 @@ _base_display_event_data(struct MPT3SAS_ADAPTER *ioc,
case MPI2_EVENT_ACTIVE_CABLE_EXCEPTION:
desc = "Active cable exception";
break;
+ case MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE:
+ desc = "PCIE Device Status Change";
+ break;
+ case MPI2_EVENT_PCIE_ENUMERATION:
+ {
+ Mpi26EventDataPCIeEnumeration_t *event_data =
+ (Mpi26EventDataPCIeEnumeration_t *)mpi_reply->EventData;
+ pr_info(MPT3SAS_FMT "PCIE Enumeration: (%s)", ioc->name,
+ (event_data->ReasonCode ==
+ MPI26_EVENT_PCIE_ENUM_RC_STARTED) ?
+ "start" : "stop");
+ if (event_data->EnumerationStatus)
+ pr_info("enumeration_status(0x%08x)",
+ le32_to_cpu(event_data->EnumerationStatus));
+ pr_info("\n");
+ return;
+ }
+ case MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST:
+ desc = "PCIE Topology Change List";
+ break;
}

if (!desc)
@@ -6187,8 +6207,16 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
_base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
_base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
_base_unmask_events(ioc, MPI2_EVENT_TEMP_THRESHOLD);
- if (ioc->hba_mpi_version_belonged == MPI26_VERSION)
+ if (ioc->hba_mpi_version_belonged == MPI26_VERSION) {
_base_unmask_events(ioc, MPI2_EVENT_ACTIVE_CABLE_EXCEPTION);
+ if (ioc->is_gen35_ioc) {
+ _base_unmask_events(ioc,
+ MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE);
+ _base_unmask_events(ioc, MPI2_EVENT_PCIE_ENUMERATION);
+ _base_unmask_events(ioc,
+ MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST);
+ }
+ }

r = _base_make_ioc_operational(ioc);
if (r)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 45b8d94..2a6a8e6 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -3132,8 +3132,6 @@ _scsih_block_io_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
struct _sas_device *sas_device;

sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
- if (!sas_device)
- return;

shost_for_each_device(sdev, ioc->shost) {
sas_device_priv_data = sdev->hostdata;
@@ -3143,7 +3141,7 @@ _scsih_block_io_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
continue;
if (sas_device_priv_data->block)
continue;
- if (sas_device->pend_sas_rphy_add)
+ if (sas_device && sas_device->pend_sas_rphy_add)
continue;
if (sas_device_priv_data->ignore_delay_remove) {
sdev_printk(KERN_INFO, sdev,
@@ -3154,7 +3152,8 @@ _scsih_block_io_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
_scsih_internal_device_block(sdev, sas_device_priv_data);
}

- sas_device_put(sas_device);
+ if (sas_device)
+ sas_device_put(sas_device);
}

/**
@@ -3238,6 +3237,33 @@ _scsih_block_io_to_children_attached_directly(struct MPT3SAS_ADAPTER *ioc,
}

/**
+ * _scsih_block_io_to_pcie_children_attached_directly
+ * @ioc: per adapter object
+ * @event_data: topology change event data
+ *
+ * This routine set sdev state to SDEV_BLOCK for all devices
+ * direct attached during device pull/reconnect.
+ */
+static void
+_scsih_block_io_to_pcie_children_attached_directly(struct MPT3SAS_ADAPTER *ioc,
+ Mpi26EventDataPCIeTopologyChangeList_t *event_data)
+{
+ int i;
+ u16 handle;
+ u16 reason_code;
+
+ for (i = 0; i < event_data->NumEntries; i++) {
+ handle =
+ le16_to_cpu(event_data->PortEntry[i].AttachedDevHandle);
+ if (!handle)
+ continue;
+ reason_code = event_data->PortEntry[i].PortStatus;
+ if (reason_code ==
+ MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING)
+ _scsih_block_io_device(ioc, handle);
+ }
+}
+/**
* _scsih_tm_tr_send - send task management request
* @ioc: per adapter object
* @handle: device handle
@@ -3856,6 +3882,81 @@ _scsih_check_topo_delete_events(struct MPT3SAS_ADAPTER *ioc,
}

/**
+ * _scsih_check_pcie_topo_remove_events - sanity check on topo
+ * events
+ * @ioc: per adapter object
+ * @event_data: the event data payload
+ *
+ * This handles the case where driver receives multiple switch
+ * or device add and delete events in a single shot. When there
+ * is a delete event the routine will void any pending add
+ * events waiting in the event queue.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_check_pcie_topo_remove_events(struct MPT3SAS_ADAPTER *ioc,
+ Mpi26EventDataPCIeTopologyChangeList_t *event_data)
+{
+ struct fw_event_work *fw_event;
+ Mpi26EventDataPCIeTopologyChangeList_t *local_event_data;
+ unsigned long flags;
+ int i, reason_code;
+ u16 handle, switch_handle;
+
+ for (i = 0; i < event_data->NumEntries; i++) {
+ handle =
+ le16_to_cpu(event_data->PortEntry[i].AttachedDevHandle);
+ if (!handle)
+ continue;
+ reason_code = event_data->PortEntry[i].PortStatus;
+ if (reason_code == MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING)
+ _scsih_tm_tr_send(ioc, handle);
+ }
+
+ switch_handle = le16_to_cpu(event_data->SwitchDevHandle);
+ if (!switch_handle) {
+ _scsih_block_io_to_pcie_children_attached_directly(
+ ioc, event_data);
+ return;
+ }
+ /* TODO We are not supporting cascaded PCIe Switch removal yet*/
+ if ((event_data->SwitchStatus
+ == MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING) ||
+ (event_data->SwitchStatus ==
+ MPI26_EVENT_PCIE_TOPO_SS_RESPONDING))
+ _scsih_block_io_to_pcie_children_attached_directly(
+ ioc, event_data);
+
+ if (event_data->SwitchStatus != MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING)
+ return;
+
+ /* mark ignore flag for pending events */
+ spin_lock_irqsave(&ioc->fw_event_lock, flags);
+ list_for_each_entry(fw_event, &ioc->fw_event_list, list) {
+ if (fw_event->event != MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST ||
+ fw_event->ignore)
+ continue;
+ local_event_data =
+ (Mpi26EventDataPCIeTopologyChangeList_t *)
+ fw_event->event_data;
+ if (local_event_data->SwitchStatus ==
+ MPI2_EVENT_SAS_TOPO_ES_ADDED ||
+ local_event_data->SwitchStatus ==
+ MPI2_EVENT_SAS_TOPO_ES_RESPONDING) {
+ if (le16_to_cpu(local_event_data->SwitchDevHandle) ==
+ switch_handle) {
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "setting ignoring flag for switch event\n",
+ ioc->name));
+ fw_event->ignore = 1;
+ }
+ }
+ }
+ spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/**
* _scsih_set_volume_delete_flag - setting volume delete flag
* @ioc: per adapter object
* @handle: device handle
@@ -6155,7 +6256,319 @@ out:
sas_device_put(sas_device);

spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+}
+
+
+/**
+ * _scsih_pcie_topology_change_event_debug - debug for topology
+ * event
+ * @ioc: per adapter object
+ * @event_data: event data payload
+ * Context: user.
+ */
+static void
+_scsih_pcie_topology_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
+ Mpi26EventDataPCIeTopologyChangeList_t *event_data)
+{
+ int i;
+ u16 handle;
+ u16 reason_code;
+ u8 port_number;
+ char *status_str = NULL;
+ u8 link_rate, prev_link_rate;

+ switch (event_data->SwitchStatus) {
+ case MPI26_EVENT_PCIE_TOPO_SS_ADDED:
+ status_str = "add";
+ break;
+ case MPI26_EVENT_PCIE_TOPO_SS_NOT_RESPONDING:
+ status_str = "remove";
+ break;
+ case MPI26_EVENT_PCIE_TOPO_SS_RESPONDING:
+ case 0:
+ status_str = "responding";
+ break;
+ case MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING:
+ status_str = "remove delay";
+ break;
+ default:
+ status_str = "unknown status";
+ break;
+ }
+ pr_info(MPT3SAS_FMT "pcie topology change: (%s)\n",
+ ioc->name, status_str);
+ pr_info("\tswitch_handle(0x%04x), enclosure_handle(0x%04x)"
+ "start_port(%02d), count(%d)\n",
+ le16_to_cpu(event_data->SwitchDevHandle),
+ le16_to_cpu(event_data->EnclosureHandle),
+ event_data->StartPortNum, event_data->NumEntries);
+ for (i = 0; i < event_data->NumEntries; i++) {
+ handle =
+ le16_to_cpu(event_data->PortEntry[i].AttachedDevHandle);
+ if (!handle)
+ continue;
+ port_number = event_data->StartPortNum + i;
+ reason_code = event_data->PortEntry[i].PortStatus;
+ switch (reason_code) {
+ case MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED:
+ status_str = "target add";
+ break;
+ case MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING:
+ status_str = "target remove";
+ break;
+ case MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING:
+ status_str = "delay target remove";
+ break;
+ case MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED:
+ status_str = "link rate change";
+ break;
+ case MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE:
+ status_str = "target responding";
+ break;
+ default:
+ status_str = "unknown";
+ break;
+ }
+ link_rate = event_data->PortEntry[i].CurrentPortInfo &
+ MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK;
+ prev_link_rate = event_data->PortEntry[i].PreviousPortInfo &
+ MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK;
+ pr_info("\tport(%02d), attached_handle(0x%04x): %s:"
+ " link rate: new(0x%02x), old(0x%02x)\n", port_number,
+ handle, status_str, link_rate, prev_link_rate);
+ }
+}
+
+/**
+ * _scsih_pcie_topology_change_event - handle PCIe topology
+ * changes
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ *
+ */
+static int
+_scsih_pcie_topology_change_event(struct MPT3SAS_ADAPTER *ioc,
+ struct fw_event_work *fw_event)
+{
+ int i;
+ u16 handle;
+ u16 reason_code;
+ u8 link_rate, prev_link_rate;
+ unsigned long flags;
+ int rc;
+ int requeue_event;
+ Mpi26EventDataPCIeTopologyChangeList_t *event_data =
+ (Mpi26EventDataPCIeTopologyChangeList_t *) fw_event->event_data;
+ struct _pcie_device *pcie_device;
+
+ if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+ _scsih_pcie_topology_change_event_debug(ioc, event_data);
+
+ if (ioc->shost_recovery || ioc->remove_host ||
+ ioc->pci_error_recovery)
+ return 0;
+
+ if (fw_event->ignore) {
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT "ignoring switch event\n",
+ ioc->name));
+ return 0;
+ }
+
+ /* handle siblings events */
+ for (i = 0; i < event_data->NumEntries; i++) {
+ if (fw_event->ignore) {
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "ignoring switch event\n", ioc->name));
+ return 0;
+ }
+ if (ioc->remove_host || ioc->pci_error_recovery)
+ return 0;
+ reason_code = event_data->PortEntry[i].PortStatus;
+ handle =
+ le16_to_cpu(event_data->PortEntry[i].AttachedDevHandle);
+ if (!handle)
+ continue;
+
+ link_rate = event_data->PortEntry[i].CurrentPortInfo
+ & MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK;
+ prev_link_rate = event_data->PortEntry[i].PreviousPortInfo
+ & MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK;
+
+ switch (reason_code) {
+ case MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED:
+ if (ioc->shost_recovery)
+ break;
+ if (link_rate == prev_link_rate)
+ break;
+ if (link_rate < MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5)
+ break;
+
+ _scsih_pcie_check_device(ioc, handle);
+
+ /* This code after this point handles the test case
+ * where a device has been added, however its returning
+ * BUSY for sometime. Then before the Device Missing
+ * Delay expires and the device becomes READY, the
+ * device is removed and added back.
+ */
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ pcie_device = __mpt3sas_get_pdev_by_handle(ioc, handle);
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
+
+ if (pcie_device) {
+ pcie_device_put(pcie_device);
+ break;
+ }
+
+ if (!test_bit(handle, ioc->pend_os_device_add))
+ break;
+
+ dewtprintk(ioc, pr_info(MPT3SAS_FMT
+ "handle(0x%04x) device not found: convert "
+ "event to a device add\n", ioc->name, handle));
+ event_data->PortEntry[i].PortStatus &= 0xF0;
+ event_data->PortEntry[i].PortStatus |=
+ MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED;
+ case MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED:
+ if (ioc->shost_recovery)
+ break;
+ if (link_rate < MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5)
+ break;
+
+ rc = _scsih_pcie_add_device(ioc, handle);
+ if (!rc) {
+ /* mark entry vacant */
+ /* TODO This needs to be reviewed and fixed,
+ * we dont have an entry
+ * to make an event void like vacant
+ */
+ event_data->PortEntry[i].PortStatus |=
+ MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE;
+ }
+ break;
+ case MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING:
+ _scsih_pcie_device_remove_by_handle(ioc, handle);
+ break;
+ }
+ }
+ return requeue_event;
+}
+
+/**
+ * _scsih_pcie_device_status_change_event_debug - debug for
+ * device event
+ * @event_data: event data payload
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_pcie_device_status_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
+ Mpi26EventDataPCIeDeviceStatusChange_t *event_data)
+{
+ char *reason_str = NULL;
+
+ switch (event_data->ReasonCode) {
+ case MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA:
+ reason_str = "smart data";
+ break;
+ case MPI26_EVENT_PCIDEV_STAT_RC_UNSUPPORTED:
+ reason_str = "unsupported device discovered";
+ break;
+ case MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET:
+ reason_str = "internal device reset";
+ break;
+ case MPI26_EVENT_PCIDEV_STAT_RC_TASK_ABORT_INTERNAL:
+ reason_str = "internal task abort";
+ break;
+ case MPI26_EVENT_PCIDEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
+ reason_str = "internal task abort set";
+ break;
+ case MPI26_EVENT_PCIDEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
+ reason_str = "internal clear task set";
+ break;
+ case MPI26_EVENT_PCIDEV_STAT_RC_QUERY_TASK_INTERNAL:
+ reason_str = "internal query task";
+ break;
+ case MPI26_EVENT_PCIDEV_STAT_RC_DEV_INIT_FAILURE:
+ reason_str = "device init failure";
+ break;
+ case MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET:
+ reason_str = "internal device reset complete";
+ break;
+ case MPI26_EVENT_PCIDEV_STAT_RC_CMP_TASK_ABORT_INTERNAL:
+ reason_str = "internal task abort complete";
+ break;
+ case MPI26_EVENT_PCIDEV_STAT_RC_ASYNC_NOTIFICATION:
+ reason_str = "internal async notification";
+ break;
+ default:
+ reason_str = "unknown reason";
+ break;
+ }
+
+ pr_info(MPT3SAS_FMT "PCIE device status change: (%s)\n"
+ "\thandle(0x%04x), WWID(0x%016llx), tag(%d)",
+ ioc->name, reason_str, le16_to_cpu(event_data->DevHandle),
+ (unsigned long long)le64_to_cpu(event_data->WWID),
+ le16_to_cpu(event_data->TaskTag));
+ if (event_data->ReasonCode == MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA)
+ pr_info(MPT3SAS_FMT ", ASC(0x%x), ASCQ(0x%x)\n", ioc->name,
+ event_data->ASC, event_data->ASCQ);
+ pr_info("\n");
+}
+
+/**
+ * _scsih_pcie_device_status_change_event - handle device status
+ * change
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_pcie_device_status_change_event(struct MPT3SAS_ADAPTER *ioc,
+ struct fw_event_work *fw_event)
+{
+ struct MPT3SAS_TARGET *target_priv_data;
+ struct _pcie_device *pcie_device;
+ u64 wwid;
+ unsigned long flags;
+ Mpi26EventDataPCIeDeviceStatusChange_t *event_data =
+ (Mpi26EventDataPCIeDeviceStatusChange_t *)fw_event->event_data;
+ if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
+ _scsih_pcie_device_status_change_event_debug(ioc,
+ event_data);
+
+ if (event_data->ReasonCode !=
+ MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET &&
+ event_data->ReasonCode !=
+ MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET)
+ return;
+
+ spin_lock_irqsave(&ioc->pcie_device_lock, flags);
+ wwid = le64_to_cpu(event_data->WWID);
+ pcie_device = __mpt3sas_get_pdev_by_wwid(ioc, wwid);
+
+ if (!pcie_device || !pcie_device->starget)
+ goto out;
+
+ target_priv_data = pcie_device->starget->hostdata;
+ if (!target_priv_data)
+ goto out;
+
+ if (event_data->ReasonCode ==
+ MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET)
+ target_priv_data->tm_busy = 1;
+ else
+ target_priv_data->tm_busy = 0;
+out:
+ if (pcie_device)
+ pcie_device_put(pcie_device);
+
+ spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
}

/**
@@ -6409,6 +6822,34 @@ _scsih_sas_discovery_event(struct MPT3SAS_ADAPTER *ioc,
}

/**
+ * _scsih_pcie_enumeration_event - handle enumeration events
+ * @ioc: per adapter object
+ * @fw_event: The fw_event_work object
+ * Context: user.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_pcie_enumeration_event(struct MPT3SAS_ADAPTER *ioc,
+ struct fw_event_work *fw_event)
+{
+ Mpi26EventDataPCIeEnumeration_t *event_data =
+ (Mpi26EventDataPCIeEnumeration_t *)fw_event->event_data;
+
+ if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) {
+ pr_info(MPT3SAS_FMT "pcie enumeration event: (%s) Flag 0x%02x",
+ ioc->name,
+ ((event_data->ReasonCode ==
+ MPI26_EVENT_PCIE_ENUM_RC_STARTED) ?
+ "started" : "completed"), event_data->Flags);
+ if (event_data->EnumerationStatus)
+ pr_info("enumeration_status(0x%08x)",
+ le32_to_cpu(event_data->EnumerationStatus));
+ pr_info("\n");
+ }
+}
+
+/**
* _scsih_ir_fastpath - turn on fastpath for IR physdisk
* @ioc: per adapter object
* @handle: device handle for physical disk
@@ -7976,7 +8417,7 @@ _mpt3sas_fw_work(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
goto out;
ssleep(1);
}
- _scsih_remove_unresponding_sas_devices(ioc);
+ _scsih_remove_unresponding_devices(ioc);
_scsih_scan_for_devices_after_reset(ioc);
break;
case MPT3SAS_PORT_ENABLE_COMPLETE:
@@ -8019,6 +8460,16 @@ _mpt3sas_fw_work(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
case MPI2_EVENT_IR_OPERATION_STATUS:
_scsih_sas_ir_operation_status_event(ioc, fw_event);
break;
+ case MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE:
+ _scsih_pcie_device_status_change_event(ioc, fw_event);
+ break;
+ case MPI2_EVENT_PCIE_ENUMERATION:
+ _scsih_pcie_enumeration_event(ioc, fw_event);
+ break;
+ case MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST:
+ _scsih_pcie_topology_change_event(ioc, fw_event);
+ return;
+ break;
}
out:
fw_event_work_put(fw_event);
@@ -8109,6 +8560,11 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
(Mpi2EventDataSasTopologyChangeList_t *)
mpi_reply->EventData);
break;
+ case MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST:
+ _scsih_check_pcie_topo_remove_events(ioc,
+ (Mpi26EventDataPCIeTopologyChangeList_t *)
+ mpi_reply->EventData);
+ break;
case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
_scsih_check_ir_config_unhide_events(ioc,
(Mpi2EventDataIrConfigChangeList_t *)
@@ -8171,6 +8627,8 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
case MPI2_EVENT_SAS_DISCOVERY:
case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
case MPI2_EVENT_IR_PHYSICAL_DISK:
+ case MPI2_EVENT_PCIE_ENUMERATION:
+ case MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE:
break;

case MPI2_EVENT_TEMP_THRESHOLD:
--
1.7.1