[PATCH] clocksource: timer-u300: Unmap region and unprepare clk obtained by of_iomap/clk_prepare_enable.

From: Arvind Yadav
Date: Wed Jun 28 2017 - 03:39:30 EST


In case of error at init time, rollback iomapping and unprepare clk.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
---
drivers/clocksource/timer-u300.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/clocksource/timer-u300.c b/drivers/clocksource/timer-u300.c
index 704e40c..e3b29ae 100644
--- a/drivers/clocksource/timer-u300.c
+++ b/drivers/clocksource/timer-u300.c
@@ -376,19 +376,22 @@ static int __init u300_timer_init_of(struct device_node *np)
irq = irq_of_parse_and_map(np, 2);
if (!irq) {
pr_err("no IRQ for system timer\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto err_iounmap;
}

pr_info("U300 GP1 timer @ base: %p, IRQ: %u\n", u300_timer_base, irq);

/* Clock the interrupt controller */
clk = of_clk_get(np, 0);
- if (IS_ERR(clk))
- return PTR_ERR(clk);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ goto err_iounmap;
+ }

ret = clk_prepare_enable(clk);
if (ret)
- return ret;
+ goto err_iounmap;

rate = clk_get_rate(clk);

@@ -422,7 +425,7 @@ static int __init u300_timer_init_of(struct device_node *np)
/* Set up the IRQ handler */
ret = setup_irq(irq, &u300_timer_irq);
if (ret)
- return ret;
+ goto err_unprepare;

/* Reset the General Purpose timer 2 */
writel(U300_TIMER_APP_RGPT2_TIMER_RESET,
@@ -444,7 +447,7 @@ static int __init u300_timer_init_of(struct device_node *np)
"GPT2", rate, 300, 32, clocksource_mmio_readl_up);
if (ret) {
pr_err("timer: failed to initialize U300 clock source\n");
- return ret;
+ goto err_unprepare;
}

/* Configure and register the clockevent */
@@ -456,6 +459,12 @@ static int __init u300_timer_init_of(struct device_node *np)
* used by hrtimers!
*/
return 0;
+
+err_unprepare:
+ clk_disable_unprepare(clk);
+err_iounmap:
+ iounmap(u300_timer_base);
+ return ret;
}

CLOCKSOURCE_OF_DECLARE(u300_timer, "stericsson,u300-apptimer",
--
1.9.1