[PATCH 1/8] drm/vc4: Fix DSI T_INIT timing.

From: Eric Anholt
Date: Tue Jun 27 2017 - 15:59:04 EST


The DPHY spec requires a much larger T_INIT than I was specifying
before. In the absence of clear specs from the slave of what their
timing is, just use the value that the firmware was using.

Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
---
drivers/gpu/drm/vc4/vc4_dsi.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
index 5e8b81eaa168..15f6d5005ab9 100644
--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -1035,7 +1035,17 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder)
DSI_HS_DLT4_TRAIL) |
VC4_SET_FIELD(0, DSI_HS_DLT4_ANLAT));

- DSI_PORT_WRITE(HS_DLT5, VC4_SET_FIELD(dsi_hs_timing(ui_ns, 1000, 5000),
+ /* T_INIT is how long STOP is driven after power-up to
+ * indicate to the slave (also coming out of power-up) that
+ * master init is complete, and should be greater than the
+ * maximum of two value: T_INIT,MASTER and T_INIT,SLAVE. The
+ * D-PHY spec gives a minimum 100us for T_INIT,MASTER and
+ * T_INIT,SLAVE, while allowing protocols on top of it to give
+ * greater minimums. The vc4 firmware uses an extremely
+ * conservative 5ms, and we maintain that here.
+ */
+ DSI_PORT_WRITE(HS_DLT5, VC4_SET_FIELD(dsi_hs_timing(ui_ns,
+ 5 * 1000 * 1000, 0),
DSI_HS_DLT5_INIT));

DSI_PORT_WRITE(HS_DLT6,
--
2.11.0