Re: [PATCH] ARM: sun8i: h3: Enable EMAC with external PHY on Orange Pi Plus 2E

From: Maxime Ripard
Date: Sat Jun 10 2017 - 05:25:07 EST


On Fri, Jun 09, 2017 at 11:34:36PM +0800, Chen-Yu Tsai wrote:
> The Orange Pi Plus 2E, unlike the Orange Pi PC and PC Plus which its
> schematics are based on, uses an external Realtek RTL8211E PHY in
> RGMII mode, with a GPIO enabling the regulator for I/O signalling
> power supplies. The PHY's main power supply is enabled by the main
> 5V power supply.
>
> Add the regulator and PHY nodes, and override the PHY phandle under
> the EMAC node, so that the EMAC works properly on this board.
>
> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>

Applied, thanks!
Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Attachment: signature.asc
Description: PGP signature